GB
1. Ensure that the rotary switch is in the „0" position and that the mains lead is
not in the socket.
2. Place the carafe on the motor housing.
Warning! Safety switch! The device only works if the carafe is positioned on
the motor housing.
3. Cut the food to be mixed into small pieces.
4. Transfer the ingredients to the carafe and put the lid in position. The lid must
be positioned fi rmly.
5. Connect the mains lead to a properly installed 230 V, 50 Hz safety power
socket.
6. Switch the device on (Level 1 or 2 etc) or use pulse operation (PULS). The
carafe must be held tightly during mixing.
•
For constant mixing (continuous mode):
During operation on levels 1 to 5 the switch locks into the respective
position.
Shift the selector to „0" to switch off the appliance.
•
For pulse mode (mixing at brief intervals):
shift the switch to „0" position. The switch snaps into place. The ap-
pliance is off now. Turn the switch now to position „PULS". The switch
must be kept in this position for the desired interval. When the switch is
released, it returns automatically to „0" position.
In order to insert more food to be mixed the small lid may be removed. Please
switch off the machine before doing so.
7. Shift the selector to „0" to switch off the appliance.
The blade in the mixing vessel is also suitable for chopping up ice cubes. Please
only fi ll the carafe up to 2/3 full with ice cubes. Only the CRUSH ICE button
should be used for breaking up the ice.
•
Fill half of the jug with water and press the push button for approximately 10
seconds. Then pour out the liquid.
•
Remove the mains plug from the socket.
•
To clean the device thoroughly please remove the carafe.
•
Diffi cult-to-remove items in the mixing bowl can be removed with a rinsing
brush. Please take care with the sharp knives!
•
Clean the individual parts in the usual way in soapy water.
28
6....-05-UM 2927 28
Putting into operation
Level 1 = low rpm
Level 5 = high rpm
Chopping up Ice Cubes
Cleaning
19.10.2004, 10:55:59 Uhr