Know Your System Control Board - Briggs & Stratton 040213 Manual De Instalación Y Arranque Rápido

KNOW YOUR SYSTEM CONTROL BOARD

Compare this Control Board illustration with your generator to familiarize yourself with the location of these important
controls and connections:
Wiring for the 2 Pole Plug:
240 Volt Utility — Use to hook up the 240V utility leads
from the transfer switch to the generator.
Wiring for the 10 Pole Plug:
12 Volt DC, .5 Amp Output — Internal power supply.
Fault — Use NO, COM and NC to hook up a siren, light,
etc. to alert you in case of a fault.
FEATURES AND CONTROLS
Remote LED Output — Use this to hook up the extra
remote LED supplied with the generator.The remote LED
will turn on and off in a series of blinks if certain faults are
detected in the generator.
Stat Station™ — Use TxRx and TxRx GND for an
optional wireless StatStation™ to monitor generator
functions.
10
Fault
StatStation™
Remote LED Output
12 Volt DC, .5 Amp Output
240 Volt Utility