Tabla de contenido
Idiomas disponibles
Idiomas disponibles
HOW TO USE
CUSTOM PROGRAM
If you have a special combination
of settings that
you use frequently, you can save these settings
as a CUSTOM PROGRAM.
• ToSave a Custom Program:
0) Turn on the dryer and turn the cycle selector
knob to select the desired cycle.
_IUse
the cycle setting buttons to adjust the
settings for that cycle.
O1 Press the cycle option button(s) for the option
you would like to add. A confirmation
message
will be shown in the display.
I_I Press and hold the CUSTOM PROGRAM button
for 3 seconds.
STEAM FUNCTIONS
TO Fill the Steam
Feeder
O! Pull out the drawer.
NOTE: You may only save one custom
program at a time. Pressing and holding the
CUSTOM PROGRAM button will overwrite
any previously saved custom program.
TORecall a Custom Program:
O1 Turn on the dryer.
O1 Press the CUSTOM PROGRAM button.
_1 Press the START/PAUSE button to start
the cycle.
_1 Fill the steam feeder to MAX with water.
Water
ONLY
Steam
Feeder
_1 Lift out the steam feeder.
_)
Place the steam feeder in the drawer; then
push in the drawer until it clicks into place.
IMPORTANT NOTES ABOUT STEAM CYCLES
_E,,0,
I'=_=,-_,,_,.u_:_:_
i Before using a Steam Cycle, the steam feeder must be filled with water up
,=r,=o. _
to the MAX line. If not, an Error message or ADD WATER will be displayed.
I
I .';'_ I I..- I Make sure that the steam feeder is filled with water and the drawer is
completely closed. Turn the dryer off then restart the Steam Cycle.
• Only use water. Do not fill the steam feeder with foreign substances, rinse agents, or detergents.
• Before moving the dryer, make sure the steam feeder is empty.
• Do not use distilled water; the water level sensor in the steam generator will not work.
WARNING:
• Do not fill the steam feeder with liquids such as gasoline, dry-cleaning
solvents, or other flammable
or explosive substances. They give off vapors that could explode.
° Do not fill the steam feeder with hot water (over 86°F/30°C).
(_L_
° Do not drink water from the steam feeder.
33
Capítulos
Tabla de contenido
Solución de problemas
