Custom Program; Steam Functions - LG DleX4270 El Manual Del Propietario

Ocultar thumbs Ver también para DleX4270:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

36
hOW TO uSE

Custom program

If you have a special combination of settings that you
use frequently, you can save these settings as a CUSTOM
PROGRAM.
to save a custom program:
1. Turn on the dryer and turn the cycle selector knob to
select the desired cycle.
2. Use the cycle modifier buttons to adjust the settings
for that cycle.
3. Press the cycle option button(s) for the option you
would like to add. A confirmation message will be
shown in the display.
4. Press and hold the CUSTOM PROGRAM button for 3
seconds.
NOTE
You may save only one custom program at a time.
Pressing and holding the CUSTOM PROGRAM button
will overwrite any previously saved custom program.
to recall a custom program:
1. Turn on the dryer.
2. Press the CUSTOM PROGRAM button.
3. Press the START/PAUSE button to start the cycle.

Steam functions

to fill the steam feeder
1. Pull out the drawer.
2. Lift out the steam feeder.
MFL67731027_en_140826.indd 36
3. Fill the steam feeder just to the filter screen.
Steam
Feeder
4. Place the steam feeder in the drawer; then push in the
drawer until it clicks into place.
NOTE
Before using a Steam Cycle, the steam feeder must be
filled with water up to the MAX line. If not, an error will
be displayed. Make sure that the steam feeder is filled
with water or the drawer is fully closed. Turn the dryer
off then restart the Steam Cycle.
• Only use Tap Water. Do not fill the steam feeder with
foreign substances, rinse agents, or detergents.
• Before moving the dryer, make sure the steam feeder
Drawer
is empty.
• Do not use distilled water; the water level sensor in
the steam generator will not work.
• Be careful when inserting the Steam Feeder
otherwise water will overflow.
• Wipe up any spilled water around the Steam Feeder
and the drawer before starting the dryer.
• Do not fill the steam feeder with hot water (over
86°F/30°C).
wWArNiNg
• Do not fill the steam feeder with liquids such as
gasoline, dry-cleaning solvents, or other flammable
or explosive substances. Failure to follow this warning
can cause serious injury or death.
• Do not drink water from the steam feeder. Failure to
follow this warning can cause serious injury or death.
Tap Water
ONLY
2014.8.26 5:17:40 PM

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Dlgx4271

Tabla de contenido