OPTIONALACCESSORIES
STACKING KIT INSTALLATION
(cont.)
|
Washer
Place the dryer on top of the washer by
fitting the dryer feet into the side brackets as
illustrated. Avoid finger injuries; do not allow
fingers to be pinched between the washer
and dryer. Slowly slide the dryer toward the
back of the washer until the side bracket
stoppers catch the dryer feet.
Insert the front rail between the bottom of
the dryer and the top of the washer. Push the
front rail toward the back of the washer until it
comes in contact with the side rail stoppers.
Install the two remaining screws to secure the
front rail to the side rails.
SPECIFICATIONS
KEY DIMENSIONS AND SPECIFICATIONS
The appearance and specifications
listed in this guide may vary due to constant product improvements.
Description
Electrical Requirements*
Gas Requirements*
Dimensions
Net Weight
Drying Capacity
Steam Dryer
*Refer to the rating plate on your dryer.
Please refer to the rating label regarding detailed information.
NG: 10-13 in. WC/LP: 10-13 in. WC (Gas Models only)
27" (W) X 30" (D) X
3811/16 ''
(H), 50" (D with door open)
68.6 cm (W) X 76.1 cm (D) X 98.3 cm (H), 127 cm (D with door open)
131 lb. (59.4kg)
IEC 7.3 cu. ft. (22.5 Ibs./10.1 kg)/(8
Ibs./3.6 kg)
J