Clarion DXZ788RUSB Manual De Instrucciones página 48

01_DXZ788RUSB_EN.book 48 ページ ２００７年１１月２７日 火曜日 午後６時３４分
Problem
No sound heard The device contains no MP3/
WMA/AAC files.
The files are not proper MP3/
WMA/AAC format.
Connectors are loose.
Sound is The MP3/WMA/AAC files are
interrupted or has improperly encoded.
noise.
The device isn't The device is damaged.
recognized.
Connectors are loose.
According to the state of
operation on the device, the
communication fault is
caused.
Can't insert the The device has been inserted
device. improperly.
The connector is broken.
48
DXZ788RUSB
Cause
Record MP3/WMA/AAC files properly to the device.
Use only properly encoded MP3/WMA/AAC files.
Disconnect the device and reconnect securely.
Use only properly encoded MP3/WMA/AAC files.
Disconnect the device and reconnect. If the device is
still not recognized, try replacing with a different
device.
Disconnect the device and reconnect.
Try reversing the connection direction of the device
(usually the brand name surface should be facing
left).
Replace with a new device.
Measure