BERTO'S SA/E60 Manual De Instrucciones página 16

16 |
The thermal insulation of the appliance and the fat
residuals cause smoke. When the appliance is used for the
first time, we recommend heating it for about 30 minutes
at the maximum temperature.
OPERATING INSTRUCTIONS
The appliance is switched on by rotating the power
regulator knob clockwise. The appliance is switched off
when the coloured mark on the knob corresponds to
position 0. By rotating the knob, it is possible to regulate
at a minimum, corresponding to the smallest part of the
mark, or at a maximum, corresponding to the largest part
of the mark (in this position, the operation is continuous).
A luminous light signals that the resistance is working.
During normal operations, the resistance will switch on
and off discontinuously.
Do not use the appliance in continuous mode (at the
maximum power) for more than 20-30 minutes.
Do not use the appliance without the basin.
EN
SA/E60: 2 independent heating zones controlled by a
power regulator.
This appliance cannot be used by people (including
children) with impaired skills or without experience
and knowledge unless under the supervision of a
person responsible for their safety who provides
precise instructions about the use of the unit.
Keep children under supervision to make sure that
they don't play with the unit.
ATTENTION: NEVER CLEAN THE APPLIANCE
WITH A WATER JET
WARRANTY CERTIFICATE
COMPANY NAME:
ADDReSS:
____________________________________________________________________________________________________
POSTAL CODe :
__________
PROViNCe:
_______________
ATTENTION!
The manufacturer declines all responsibility for any inaccuracies in this handbook due to typing or printing errors.
The manufacturer reserves the right to make any changes that may be required without altering the basic features of the
product. The manufacturer declines all responsibility in the event that the instructions given in this handbook are not fully
observed. The manufacturer declines all responsibility for any direct or indirect damage caused by incorrect installation,
tampering, poor maintenance and negligent use.
CLEANING
____________________________________________________________________________________________
TOWN:
___________________________________________________________________________
INSTALLATION DATE:
MODEL.
_________________________________________
PART NUMBER:
IMPORTANT
Before any operation, disconnect the appliance from the
power supply. in order for the appliance to last longer,
clean it frequently following the instructions:
The stainless steel parts must be cleaned with suitable
and non abrasive products that can easily be found on the
market. Never use substances containing chlorine (such as
bleach, etc.);
The painted parts and the chromium-plated parts must
be cleaned with a cloth wet with soap and water or a
liquid non-corrosive cleanser and water. Never use a metal
sponge or cleansers containing abrasive substances
IMPORTANT
in the event of an anomalous operation, have the
appliance checked by qualified personnel.
MAINTENANCE
IMPORTANT
Before carrying out an operation, cut off the power. The
appliance doesn't need particular maintenance, but make
sure that the conductors, the controls and the electric
resistances are in good condition. use original spare parts
only.
MAiNTeNANCe MuST Be CARRieD OuT By QuALiFieD
PeRSONNeL
The manufacturer declines all liabilities for possible
mistakes contained in this manual due to transcription or
printing. Furthermore, the manufacturer reserves the right
to make all possible modifications to the appliance that
are considered useful or necessary without affecting its
essential characteristics.
____________________________________________________________
________________________________