Remote Control - cecotec CONGA 1690 Manual De Instrucciones

ENGLISH
surface. The robot vacuums the floor's dust automatically, in and organized and efficient
way, as it features memory and gyroscopic navigation, carrying out a cleaning cycle in zig
zag, then Edge mode, then Random mode and returning directly to the charging base while it
memorizes the route.
Moreover, it changes direction when it finds obstacles throughout its route and it returns to
the charging base in a smart and direct way once the cleaning is over. It includes Total Surface
function, through which the robot cleans the whole surface and, once it has finished, keeps on
cleaning until it runs out of battery.
2. Back-home mode
This mode can be selected at any point of any cleaning cycle. Once it is activated, the robot
will automatically return to the charging base.
Warning: Remove the Wet & dry tank during charge.
3. Scrubbing mode
This robot can also scrub the floor. When this mode is activated, the robot moves in a swaying
motion, simulating real scrubbing moves. It starts off carrying out an organized scrubbing
cycle in zig zag motion, a whole cleaning cycle in Edge mode and finally returns to the
charging base taking the straightest way and memorizing the route. If it runs out of battery
before finishing, it will recharge and the resume cleaning until finished.

REMOTE CONTROL

TIME SETTINGS AND SCHEDULING
SCHEDULING
Warning: the robot cannot be scheduled from more than one device at a time. Make sure to
schedule it either from the mobile phone App or from the remote control.
28
1_Schedule
2_Power levels (Turbo/Normal/Eco)
3_Back home
4_Time
5_Manual control
6_On/Pause
7_Edge mode