Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TECHNICAL DATA
TYPE
WORKING PRESSURE Bar
AIR CONSUMPTION l/min
SPEED CONTROL
ROTATION RPM
ORBITAL DIAMETER mm
DISC PAD DIAMETER mm
WEIGHT Kg
GENERAL WARNINGS
SAFETY AND ACCIDENT PREVENTION INSTRUCTIONS
The safety and accident prevention instructions are reported in
the "SAFETY INSTRUCTION" booklet which forms an integral
part of these documents; the operating instructions indicate
the additional information required specifically for use of the
tool.
Never use the tools without the safety guards.
Any operations carried out on the tool must be effected with
the tool disconnected.
Before starting the tool, ensure that it is held tightly and not in
contact with the work surface.
Due to risks that may arise during polishing, we recommend
the constant use of P .S.D. (personal safety devices such as
gloves, headphones, goggles, face masks, etc.) according to
laws in force to prevent or reduce accident probability.
8
Warning! Carry out the lubrication process outlined on page
10, in the maintenance paragraph. The appliance continues to
work for a few seconds after it has been switched off.
CORRECT USAGE
The tools must only be used for polishing painted surfaces,
wood, plastic, composite and similar.
Metal and materials with an asbestos content must not be pro-
cessed with these tools.
The tools must not be damp nor operated in a damp environ-
ment for electrical safety reasons.
The tools may only be used for dry sanding.
Make sure the work piece is sufficiently fastened.
In the event of improper use, the user is fully liable for any da-
mages or accidents.
ENGLISH
LHR75
6
320
YES
11.000
15
75
0,750
8
Tabla de contenido
