Pioneer BCS-707 Manual De Instrucciones página 27

Checking the information of connected
Bluetooth device
This function is operated after pairing. You can
check the Bluetooth information.
Press DISPLAY repeatedly.
Bluetooth information is changed as follows.
Local Bluetooth Device Address t Device
Name t None t ...
NOTE
• This units dose not be supported the Mono
Headset Profi le (Hands Free Profi le).
• The sound may be interrupted when the
connection interfered by the other electronic
wave.
• You cannot control the Bluetooth device with
this unit.
• Pairing is limited one Bluetooth device per one
unit and multi-pairing is not supported.
• Although the distance between your Bluetooth
and the set is less than 10 m, there are obstacles
between both, your Bluetooth device cannot be
connected.
• Depending on the type of the device, you may
not be able to use the Bluetooth function.
• When not connected the Bluetooth, "BT READY"
appears on the display window.
• The Electrical malfunction due to devices using
same frequency such as Medical equipment,
Microwaves or wireless LAN devices, the
connection will be disconnected.
• When someone stands and interrupts
communication between Bluetooth device and
the player, the connection will be disconnected.
• If the gotten away of the distance between
Bluetooth and the unit, the sound quality is lower
and lower the connection will disconnect when
the space between the Bluetooth and the unit
gets out of the operating range of Bluetooth.
• The device with Bluetooth wireless technology
is disconnected, if you turn off the main unit or
put the device away from the main unit more
than 10 m.
Installation 27
3