Connecting Players And Speakers; Connecting Recorders; Connecting The Power Cord - Denon Professional DN-A300M Instrucciones De Funcionamiento

ENGLISH
Connections

Connecting Players and Speakers

• Only Turntables fitted with a MM
(Moving Magnet) cartridge can
be used with this unit. If you
have an MC (Moving Coil)
cartridge you will need to use a
commercially available head
amplifier or step-up transformer.
• If humming or other noise is
generated when the ground wire
is connected, disconnect it.
Speaker
(A)
R L
AUDIO OUT
Ground wire

Connecting Recorders

Speaker
(B)
R L

Connecting the power cord

5
ENGLISH
Connections
AC outlet
(wall)
Power cord
AC 230 V, 50 Hz
(included)
Connecting to the AC OUTLETS
• SWITCHED :
The power supplies from the SWITCHED outlets
turns on and off together with the main unit's
POWER switch.
• UNSWITCHED :
The power always supplies from the
UNSWITCHED outlet unless the power cord is
unplugged.
• Make sure the total power consumption of the
connected devices does not exceed 100W(0.45A).
NOTE:
• Only use the AC OUTLETS for audio equipment.
Never use it for hair driers, TVs or other electrical
appliances.
• Insert the plugs securely. Incomplete connections
will result in the generation of noise.