Residual Risks - DeWalt DW083 Traducido De Las Instrucciones Originales

• Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep
your hair, clothing, and gloves away from moving parts. Loose clothing, jewelry or
long hair can be caught in moving parts. Air vents often cover moving parts and should
also be avoided.

WARNING: Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.

WARNING! DO NOT DISASSEMBLE THE LASER. There are no user serviceable
parts inside. Disassembling the laser will void all warranties on the product.
Do not modify the product in any way. Modifying the tool may result in hazardous
laser radiation exposure.
Additional Safety Instructions for Lasers
• This laser complies with class 2 according to IEC/EN 60825-1:2014. Do not replace a
laser diode with a different type. If damaged, have the laser repaired by an authorised
repair agent.
• Do not use the laser for any purpose other than projecting laser lines. An exposure of the
eye to the beam of a class 2 laser is considered safe for a maximum of 0.25 seconds. Eyelid
reflexes will normally provide adequate protection.
• Never look into the laser beam directly and intentionally.
• Do not use optical tools to view the laser beam.
• Do not set up the tool at a position where the laser beam can cross any person at
head height.
• Do not let children come in contact with the laser.
• When you notice liquid leaking out, proceed as follows:
ʵ Carefully wipe the liquid off using a cloth. Avoid skin or eye contact. Do not swallow.
ʵ In case of skin or eye contact, rinse the liquid off with clean flowing water for at least 10
minutes and contact a doctor.

WARNING: Fire hazard ! Avoid short-circuiting the contacts of a removed battery.

Residual Risks

The following risks are inherent to the use of this device:
• injuries caused by staring into laser beam.
EnGLIsH
31