VE Series Floor Scale
4. MAINTENANCE
4.1 Cleaning
WARNING: Electric Shock Hazard. Disconnect the equipment from the power supply before cleaning.
Make sure that no liquid enters the interior of the instrument.
Attention: Do not use solvents, harsh chemicals, ammonia or abrasive cleaning agents.
The exterior surfaces of the instrument may be cleaned with a cloth dampened with water and a mild detergent.
4.2 Troubleshooting
For technical issues contact an Authorized Ohaus Service Agent. Please visit our website www.ohaus.com to locate the
Ohaus office nearest you.
5. TECHNICAL DATA
Specifications:
Floor Scale Models
Capacity
Operating Temperature / Humidity
Emin
Load Cell Capacity Emax
Load Cell Safe Overload Limit
Load Cell Output Impedance
Load Cell Excitation Voltage
Junction Box
6. COMPLIANCE
Compliance to the following standards is indicated by the corresponding mark on the product.
Mark
Standard
This product complies with the EU Directives 2014/30/EU (EMC), 2014/35/EU (LVD) and 2014/31/EU
(NAWI). The EU Declaration of Conformity is available online at www.ohaus.com/ce.
This product complies with the EU Directive 2002/96/EC (WEEE). Please dispose of this product in
accordance with local regulations at the collecting point specified for electrical and electronic equipment.
For disposal instructions in Europe, refer to www.ohaus.com/weee.
VE1500S/SW
1500 kg
-10 ° C to 40 ° C / 0% to 95% Relative Humidity, Non-Condensing
0.5 kg
1000 kg
Rear panel access, IP65, Stainless Steel, with 5 m Cable
VE1500R/RW /
VE3000R/RW
1500 kg / 3000 kg
0.5 kg / 1 kg
1000 kg / 1500 kg
120% of Emax
350 Ω ± 3.5 Ω
5V ~15V, DC/AC
EN-3
VE1500L/LW /
VE3000LW/LW
1500 kg / 3000 kg
0.5 kg / 1 kg
1000 kg / 1500 kg