7. PICTOGRAMS
The meaning of the pictograms shown on the machine is:
Always use safety shows.
A helmet, safety glasses and a mask must be always used in ope-
ration.
The instruction manual must be read before starting the machine.
Always use safety gloves.
Acoustic power level.
Residual tensión warning
Bearings lubrication every 80 hours
80 hr
MATERIALS THAT CAN BE CRUSHED (PRIOR TO SIZE REDUCTION TO SMALLER PARTS BEFORE PUTTING
THEM INTO THE MACHINE.
- All kind of either hollow thick or narrow bricks, Poroton, termoarcillas, rasillas, small vaults and y clay derivates.
- Tiles, porcelain, stoneware and similar materials.
- Roof tiles.
- Blocks of concrete and aerated concrete.
MATERIALS THAT MUST NOT BE PUT TO CRUSH.
- Granite curb, rock curb, cobblestones, rock or stones.
- Reinforced concrete and metals.
- Plastic, glass, glass.
- Wood and similar.
- Household goods, household appliances, batteries and any other object or material not indicated in this manual.
8
Mínimum wire section
SECCIÓN CABLES ELÉCTRICOS
DIAMETER ELECTRICAL WIRE
Plug into a 40 A switch board.
Risk of entangle-
Sense of rotation
ment
Voltag
40A
Maximum and minimum vol-
tage allowed
ENG