Memory Management - DeFelsko PosiTector SHD Manual Del Usuario

Cont. Reading
When enabled, the gage will continuously display probe readings.
Ideal when a test timer is not required or when performing a calibration
verification. Cont. Reading is not available when Memory, Statistics
or HiLo Alarm modes are enabled.
Battery Type
Selects the type of batteries used in the Gage from a choice of
"Alkaline", "Lithium" or "NiMH" (nickel-metal hydride rechargeable).
If "NiMH" is selected, the Gage will trickle charge the batteries while
connected via USB to a PC or optional AC power supply (USBAC).
The battery state indicator symbol
selected battery type. No damage will occur if the battery type
used in the Gage does not match the selected battery type.
A statistical summary will appear on the display. Remove the last
reading by pressing the (-) button. Press (+) to clear statistics.
Average
Maximum Value
HiLo Alarm
Allows Gage to visibly and audibly alert the user when readings
exceed user-specified limits.
The PosiTector SHD has internal memory storage for recording
measurement data. Stored measurements can be reviewed on-screen
or accessed via computers, tablets and smart phones. All stored
measurements are date and time-stamped.
The symbol appears when the Gage is set to store measurement data.
Standard models
Advanced models
batches. "New Batch" closes any currently opened batch and creates
a new batch name using the lowest available number.
names are date-stamped when they are created.
(Continuous Reading)
Statistics Mode

Memory Management

store up to 250 readings in one batch.
store 100,000 readings in up to 1,000
6
is calibrated for the
Standard Deviation
Minimum Value
New batch