DeFelsko PosiTector SHD Manual Del Usuario página 10

Bluetooth Smart
(Advanced models only, serial numbers 784000 and greater)
Sync Batches
Select batches to flag them for synchronization to the PosiTector
App. New batches created while Bluetooth Smart is enabled are
automatically selected.
With Bluetooth Smart enabled, select Sync Batches to transfer
selected batches to the PosiTector App. This is useful when
switching between smart devices, as only readings and batches that
have yet to be synchronized with any smart device are synchronized
automatically.
NOTE:
If Bluetooth Smart is disabled, data from batches selected
in the Sync Batches menu are held in a queue until communication
with the PosiTector App is re-established.
Send Batches
Transfers selected batches to the PosiTector App (useful when
switching between devices).
The send batches option is visible in the menu when the Gage is
connected to a smart device running the PosiTector App.
Updates
Determine if a software update is available for your Gage.
See www.defelsko.com/update
The Gage will perform a Hard Reset after an update
(pg. 5). All stored measurements will be erased from memory.
9