Fitting The Carrying Ring; Fuel - Stihl KA 85 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

English
Securing the loop handle
A
9
10
Secure the loop handle (4) about
N
20cm/8in (A) forward of the control
handle (9).
Line up the loop handle.
N
Tighten down the screws firmly –
N
lock the nuts if necessary.
The sleeve (10) (not fitted on all models)
must be between the loop handle and
the control handle.
36

Fitting the Carrying Ring

The carrying ring comes standard with
the machine or is available as a special
accessory.
4
For position of carrying ring see "Main
Parts".
Place the clamp (1) against the
N
drive tube with the tapped hole on
the left (viewed from engine).
Squeeze the two ends of the clamp
N
together and hold in that position.
Insert the M6x14 screw (2).
N
Line up the carrying ring.
N
Tighten down the screw firmly.
N
1
1
2

Fuel

Your engine requires a mixture of
gasoline and engine oil.
WARNING
For health reasons, avoid direct skin
contact with gasoline and avoid inhaling
gasoline vapor.
STIHL MotoMix
STIHL recommends the use of STIHL
MotoMix. This ready-to-use fuel mix
contains no benzol or lead, has a high
octane rating and ensures that you
always use the right mix ratio.
STIHL MotoMix uses STIHL HP Ultra
two-stroke engine oil for an extra long
engine life.
MotoMix is not available in all markets.
Mixing Fuel
NOTICE
Unsuitable fuels or lubricants or mix
ratios other than those specified may
result in serious damage to the engine.
Poor quality gasoline or engine oil may
damage the engine, sealing rings, hoses
and the fuel tank.
Gasoline
Use only high-quality brand-name
gasoline with a minimum octane rating
of 90 – leaded or unleaded.
KA 85 R

Capítulos

Tabla de contenido
loading

Tabla de contenido