Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Playing back music files
You have two possibilities to replay your own music files with
the device: Wired or wireless via Bluetooth.
By cable (Cable not included)
1. If required, use a suitable adapter (not included).
Connect the external device as follows:
• With a 3.5 mm stereo jack plug to the AUX IN socket
(Back side of the device).
2. Repeatedly press the POWER/FUNCTION button (1)
until "AU" is shown in the display.
3. Start the playback of your audio source. Listen to the
sound playback via the speaker. You can adjust the vol-
ume using the VOLUME+/AL1 / VOLUME-/AL2 buttons
(7/6).
4. For the further procedure, please refer to the user manual
of the external audio source.
NOTE:
If possible, adjust the volume of the external unit to a com-
fortable level.
Cordless via Bluetooth
Bluetooth involves a technology for wireless radio connec-
tion of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (Industrial, Scientific and Medical). Interference
can be caused for example by WLAN-networks, DAB radios,
cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth-
enabled device. The functional radius is limited to approx.
15 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced
Audio Distribution Profile) and has a music-player function,
then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By
streaming, stereo-audio signals are wirelessly transferred be-
tween the playing device (source) and the receiving device.
To be able to remotely control the source, the playback de-
vice must support the AVRCP profile (Audio Video Remote
Control Profile).
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
• Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in
your player (e.g. mobile phone). For this, refer to the
operation manual of your player.
2. Press the POWER/FUNCTION button (1) repeatedly,
until "bt" is shown on the display. Two short beeps
can be heard. These signalize that the device is in
pairing mode.
3. Chose the Bluetooth menu in your player and register
the device in your player. For this, refer to the opera-
tion manual of your player. The device "AEG MRC
4132 BT" will show in your player as a selection.
NOTE:
Only one playback device may be connected with
the device at one time. If the device is already con-
nected with another playback device, the device
will not show up in the BT selection menu.
4. Now enter the password "0000" in your player,
depending on the device manufacturers, model, and
software version.
If the registration was done successfully, a beep will sound.
For the further procedure, please refer to the user manual
of the playback unit. If possible, adjust the volume of the
external unit to a comfortable level.
NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect the
devices.
• In case of problems with the registration of a playback
device, deactivate the Wi-Fi/mobile data function on
your playback device.
• The Bluetooth compatibility cannot be ensured for
devices (e.g. mobile phones) getting released in the
future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an energy-sav-
ing mode. Deactivate the energy-saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player Observe the operation
manual of your player.
• If a mobile phone on which you are playing music
receives a call, the music will be interrupted. Press the
/ button (11), to accept the call. The sound is
replayed by the loudspeakers. Speak into the micro-
phone on the device or transfer the conversation to
your mobile phone. To do this, observe the overlay in
the display of the mobile phone. After you have ended
the call, the devices are connected to each other again
and playback continues.
English
37
Tabla de contenido
