Heat-Up Indicator; Clock Functions; Clock Functions Table - Electrolux EOC3485 Manual De Instrucciones

10 www.electrolux.com

5.6 Heat-up indicator

When you activate an oven function, the
bars in the display

6. CLOCK FUNCTIONS

6.1 Clock functions table

Clock function
Press
switch between the clock
functions.
To confirm the settings of the
clock functions, press
wait 5 seconds for an
automatic confirmation.
6.2 Setting the DURATION or
END
1. Press
display shows
or
2. Press
and press
For Duration
and then the hours, for End
set the hours and then the minutes.
An acoustic signal sounds for 2 minutes
after the time ends.
time setting flash in the display. The oven
stops.
come on one by
TIME OF DAY
MINUTE MINDER
DURATION
END
again and again to
again and again until the
or .
flashes in the display.
or to the set the values
to confirm.
first you set the minutes
or
one. The bars show that the oven
temperature increases or decreases.
Application
To set, change or check the time of day. Refer to
"Setting the time".
Use to set a countdown time (maximum 23 h 59 min).
This function has no effect on the operation of the ap-
pliance. You can set the MINUTE MINDER at any
time, also if the appliance is off.
To set how long the appliance operates. Use only
when an oven function is set.
To set when the appliance must deactivate. Use only
when an oven function is set. You can use Duration
and End at the same time (time delay), if the appliance
is to be activate and deactivate automatically later.
3. Turn the knob for the oven functions
4. Press any button or open the oven
or
6.3 Setting the MINUTE MINDER
1. Press
2. Press
first you
The appliance now calculates the time in
hours and minutes.
symbol and
3. The MINUTE MINDER starts
to the off position.
door to stop the acoustic signal.
If you press
the hours for DURATION
the appliance goes to setting
of the END
again and again until
"00" flash in the display.
or to set the MINUTE
MINDER.
First you set the seconds, then the
minutes and then the hours.
At first, the time is calculated in
minutes and seconds. When the time
you set is longer than 60 minutes, the
symbol comes on in the display.
automatically after five seconds.
when you set
,
function.
and