Skoda EEA 400 001A Instrucciones De Montaje página 29

8353_TAZNE_ZAR_FABIA/MN/.fm Page 28 Wednesday, September 8, 2004 9:17 AM
- In case of modification with a seven-pole socket without a contact to disconnect the
back fog head lamp of the towing vehicle the position 58b cannot be used (i.e. to the
54g (52) connection plug together the grey/white, grey/yellow conductors in it).
Thirteen-pole socket with a contact to disconnect the back fog head lamp of the
towing vehicle.
Socket
1
2
3 *
4
5
6
7
2a
- In case of modification with a thirteen-pole socket without a contact to disconnect the
back fog head lamp of the towing vehicle the position 2a cannot be used.
8
9 **
10
11
12
13 *
Note
*/ Both the frame lines must not be connected electrically at the side of the
trailer coupling.
** / The additional appliances can be connected here (caravans, interior lighting
etc.).
Attention
The socket type as well as the pin assignation are governed by laws and regula-
tions of the country in which the vehicle with installed tow bar will be registered.
- 15 -
- Once the socket has been connected, clamp it back into its cover.
- Fit the bushing (M) upon the cover of the socket, and install the complete assembly
upon the holder of the socket of the trailer coupling.
- Screw it with three screws M5 (O) -arrows-.
Black process 45.0° 141.0 LPI
Colour of conductor
black-white
grey-white
brown (thin conductor)
black-green
grey-red
black-red
grey-black
grey-yellow
(2 conductors)
red
black
brown
(thick conductor )
Function
L.H. direction indicators
tail fog lamps
grounding (for 1–8)
R.H. direction indicators
R.H. position lights
brake lights
L.H. position lights
disconnecting of the fog lamps
of the car
not occupied
power supply (permanent plus)
power supply (plus connected and
disconnected)
not occupied
not occupied
grounding (for 9 - 12)