List Of Materials; Parts Supplied; Parts Not Supplied - ELICA EVL430S1 Guía De Instalación, Uso Y Mantenimiento

List of Materials

Parts supplied

Removing the packaging
CAUTION!
Remove carton carefully, wear gloves to protect against sharp
edges.
WARNING!
Remove the protective film covering the product before putting
into operation.
• Hood canopy assembly with ventilator and halogen
lamps already installed
• Vent transition installed
• Aluminum mesh filters.
• 2 piece duct cover.
• Hardware bag with:
ETB430S1
ETB436S1
5x45 mm
3.5x9.5 mm
2.9x6.5 mm
4.2X8 mm
8x40 mm
10x50 mm
Torx 10
Torx 20
Duct cover
bracket
Mounting template
EPT430S1 EVL430S1
EPT436S1 EVL436S1
6
2
2
4
6
4
1
1
1
1
Parts needed
• Home power supply cable
• ½" (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
For vented installations, you will also need:
• 1 wall or roof cap
• Metal vent system

Parts not supplied

Optional Accessories
ETB430S1
ETB436S1
Recirculating kit
Charcoal filter kit
Tools/Materials required
• Level
• Drill with 1¼" (3.2 cm),⅛" (3.2 mm), and
drill bits
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Vent clamps
• Jigsaw or keyhole saw
• Flat-blade screwdriver
• Metal snips
• Phillips screwdriver
5
EPT430S1 EVL430S1
EPT436S1 EVL436S1
KIT02721 KIT02766
KIT02667
⁄ " (4,8 mm)
1
16