Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Allen key
Blade
attachment key
Transmission
gearbox
Blade
Put the machine on a firm surface and loosen the
four bolts (2) and remove the handlebar's footstrap
(3), adjust the right-side handlebar (6), observing
the mounting hole (8). Fit the cord (4) as shown in
the picture, bring the footstrap and place the two
bolts for this side without tightening them. Then,
fit the left-side handlebar (1) on the other side,
also observing the mounting hole (8), and place
the two bolts for this side in the same way. When
the four bolts are back into place, tighten them.
Finally, with the mower placed on the supporting
belt in the operating position, adjust the distance
between the handlebar's support (5) and the motor
(7), at a comfortable working position.
30
Main Components
Blade
locking pin
(5 mm)
Protection skirt
Mounting the Handlebar
On/Off
switch
Right-side handlebar
Supporting belt
6
Motor
Supporting
belt holder
Left-side handlebar
7
2
4
8
www.trapp.com.br
Plug
1
3
8
5
Tabla de contenido
