TRAPP Master 3000 Manual De Instrucciones página 33

www.trapp.com.br
Trigger
Lock
In the single-phase model (see picture), the
handheld mower is equipped with a 110/220 V
voltage selector switch, provided with a printed
fuse. If equipment is connected to wrong voltage,
is short-circuited or rotor is blocked, the fuse will
se brake and the selector switch will have to be
replaced.
Note:
Replacement of selector switch is not
covered by warranty.
At every 30 hours of use:
Fill the transmission gearbox with grease until it
 
overspills from the threading.
To do this, remove the bolts (1) as seen in the
 
picture.
Warning!
Lubrication deadlines were established
 
for normal use conditions.
Use only high rotation rolling bearing
 
grease.
Switch
Voltage Selector Switch
Lubrication
Before you start operating your Master 3000
mower you should study carefully how the switch
works - for this model, it is the triggerwith-lock
type.
It works in two ways.
One is by touch, by pressing the trigger down with
your finger.
The other is by activating the trigger with your
thumb - this way you can release the trigger
and the motor keeps running non-stop. In this
condition, simply activate and then release the
trigger to turn off the equipment.
1
33