Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Before connecting, always check if the mower's
tension is the same as the power supply.
Put the mower on the ground, fold the extension
cord (1) at the female-plug end, with enough
slack to connect it to the maleplug on the motor's
outlet (2).
Hook the extension cord's fold to the lock (3),
as seen in the picture and only then connect the
male-plug to the power source.
Check to see whether supply voltage is the same
of that of the equipment (220 or 380 V).
Standardize wall outlets for the machine. Prefer
those with guide pin.
Install male outlet on the roçadeira/mower
and test it: turn on and off to check revolution
direction. The right revolution is in
counterclockwise direction.
If revolution direction is not right, change the
position of the outlet wires.
32
Using the Supporting Belt
Where to Connect
For Three-phase Version Only
When the mower fits well with the supporting belt,
it makes the job considerably easier. A good fit
will help you avoid sore arms and back pain.
You can adjust the equipment to your own needs
with your arms slightly curved.
How high you'll hold the mower will depend on
what kind of terrain you'll have to cope with. The
more difficult the environment - many stones and
branches - the higher it should be.
2
3
1
When revolution is right, standardize all outlet
connections and test again. Also standardize
extension cords.
Revolution in the wrong direction will loosen the
blade and may cause serious accidents. Retighten
nuts that secure the blade.
Note:
This test and the standardization are
necessary for three-phase model only.
www.trapp.com.br
Tabla de contenido
