PiC indolor CS 530 Manual De Instrucciones página 23

once the monitor has infl ated the cuff to a pressure of approximately 180 mmHg, the cuff will slowly
3.
defl ate and the measurement will be taken. If the cuff reaches a pressure of 300 mmHg when infl ating,
the monitor will immediately start to defl ate it for safety reasons.
after the measurement has been taken, the systolic and diastolic pressure and pulse rate values will be
4.
shown at the same time on the display and automatically saved in the previously selected user memory.
Notes
a) the monitor will automatically reinfl ate the cuff to a pressure of approximately 200 mmHg and take
another reading, if it detects the user needs greater pressure to measure blood pressure.
Retrieving stored values
the monitor has two User Memories. Each one can store up to 60 readings.
1.
to see stored values, press the Select User Memory button to choose the User Memory (1 or 2) press
2.
the M button to display stored values
the fi rst digit to appear is the average value of the last few readings (a maximum of three); press the
3.
M button again to display previously stored readings, starting with the most recent.
b) press the ON/OFF button or the M button to stop a
reading: the cuff will immediately defl ate
23
press the ON/OFF button to
5.
turn off the monitor. The monitor
will automatically switch off after
60 seconds, if no buttons are
pressed.