Fiem MG50 Junior Special Manual De Uso página 11

MANUAL FOR USE OF INCUBATORS MOD. MG 50+70+100
GB
BEFORE USE: Before using the incubator, it is recommended to study the Instruction Manual, especially the technical and safety data
aspects, in order to gain an understanding of the components and the potential operation of the machine.
WARNING: This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by
children without supervision. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
INFORMATION TO THE USERS: Under Legislative Decree 25 September 2007, no.185 and art. 13, Legislative Decree 25 July 2005,
no.151 "Implementation of Directives 2002/95/EC, 2002/96/EC and 2003/108/EC, regarding the reduction of use of hazardous substances in
electrical and electronic equipment as well as waste disposal". The barred waste container symbol on the equipment means that the product,
at the end of its service life, must be disposed of separately from the other types of waste. The user must therefore convey the equipment,
at the end of its service life, to the appropriate separate collection centres for electronic/electro technical waste products or return it to the
dealer when purchasing a new equivalent equipment. The appropriate separate collection and the following sending of the used equipment
to recycling, treatment and eco-friendly disposal will help avoid negative effects on the environment as well as on health along with an easier
recycling of the materials forming the equipment. Any unauthorized disposal of the product by the user will imply the enforcement of the admi-
nistrative sanctions as set out in Legislative Decree no. 22/1997 (article 50 and following articles, Legislative Decree no. 22/1997).
MACHINE UNPACKING: Take the incubator out of its cardboard box and remove the internal components which are secured by the adhesive
tape and check that they are intact. Check the following components are included:
Re. MG 50 Junior Special
• 1 no. Instruction Book
• 1 no. thermometer + plastic case
(secured on the floor)
• 1 no. basin with automatic
constant level water flow and
external accumulation tank
• 1 no. metal setting & hatching
basket
• 1 no. safety fuse type 2A.
The incubator is supplied with a single phase electric cable (approx. 2 mt.) with a plug for the electric connection 220/230V, 50/60 HZ. On the
back of the machine, the data plate gives full details regarding the voltage, power requirements, registration number and production date.
IMPORTANT: Remember to check thermometer is working correctly, examining that there are no breaks in the line of alcohol.
IMPORTANT NOTICE: In order to comply with the latest CE specifications in
terms of human safety from dangerous materials contained on electric and non
electric equipments we have been thermometers/hygrometers to the actual rules via
the replacement of the now forbidden mercury with colored alcohol.
Being this last one physically more volatile and subject to fragmentations, sometimes
invisible because of his discoloration, the result is that the new thermometers are
less reliable.
Consequently we ask our esteem customers & distributors to pay the maximum
attention before using our thermometers, examining that there are no gaps visible in
the alcohol/liquid to be positioned vertically.
The adequate room temperature for storing our thermometers is comprised between 10°C to 30°C.
Before using the machine, remember to clean it carefully inside and outside, as shown in the relative paragraph.
With reference to the models MG70 & MG 100 take out the metal setting trays and place the eggs into them with the points downwards
case of empty space between the eggs use the springs supplied in order to keep the eggs blocked.
Once the machine has reached the working temperature introduce the trays into the machine. Regarding the model MG 50 place the eggs lying
on the wire mesh in horizontal position, between the rods of the egg-turning grid.
ATTENTION: the correct working temperature for models MG 50 J.Special & MG 70/100 Family is fixed to 101°F (corresponding to
38,3°C). Regarding our model MG 100/150 B.Family the correct working temperature is 99,7°F (corresponding to 37,7°C)
It is noted that in order to guarantee the embryonic development, the eggs must be placed with the air space towards the top.
1
Re. MG 70/100 Family
• 1 no. Instruction Book
• 1 no. thermometer + plastic case
(secured on the floor)
• 2 no. metal egg-trays for incubation
• 1 no. basin with automatic
constant level water flow
and external accumulation tank
• 1 no. metal hatching basket
• 4 no. metals springs
• 1 no. safety fuse type 2A.
Re. MG 100/150 B. Family
• 1 no. Instruction Book
• 1 no. thermometer + plastic case (secured on the floor)
• 3 no. metal egg-trays for incubation
• 1 no. metal hatching basket
• 1 no. basin with automatic constant level water flow
and external accumulation tank
• 6 no. metals springs
• 1 no. safety fuse type 2A.
; in
1
11