Battery Replacement; Waste Disposal - Silca M-SNOOP Manual De Uso

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14

Carefully loosen the three screws (F) and remove the cover.

Insert a non-metallic point into slot (G) of the battery holder and press lightly to remove the
battery.

Fit a new 2032 lithium battery.
ATTENTION: fit the battery with the "+" sign towards the battery holder, as shown. Close the
M-SNOOP device without forcing the 3 screws (F).
From "Actuation of Directive 2012/19/EU r eg a rdi n g W as t e Ele ct ric al a n d E le ct ro n ic
The symbol of a crossed waste bin found on equipment or its packing indicates that at the end of
the product's useful life it must be collected separately from other waste so that it can be properly
treated and recycled .
In particular, separate collection of this professional equipment when no longer in use is
organised and managed :
a.
directly by the user when the equipment was placed on the market before 31 December
2010 and the user personally decides to eliminate it without replacing it with new
equivalent equipment designed for the same use ;
b.
by the manufacturer, that is to say the subject which was the first to introduce and market
new equipment that replaces previous equipment, when the user decides to elimi-
nate equipment placed on the market before 31 December 2010 at the end of its
useful life and replace it with an equivalent product designed for the same
use. In this latter case the user may ask the manufacturer to collect the existing equip-
ment;
c.
by the manufacturer, that is to say the subject which was the first to introduce and
market new equipment that replaces previous equipment, if it was placed on the market
after 31 December 2010 ;
With reference to portable batteries/accumulators, w hen such products are no longer in use
the user shall take them to suitable authorised waste treatment facilities.
Suitable separate collection for the purpose of forwarding discarded equipment and batteries/
accumulators for recycling, treatment or disposal in an environmentally friendly way helps to
avoid possible negative effects on the environment and human health and encourages re-use
and/or recycling of the materials making up the equipment.
To remove batteries/accumulators, consult the manufacturer's specific instructions: (see relevant
chapter in the users' manual).
The sanctions currently provided for by law shall apply to users who dispose of equipment, bat-
teries and accumulators in unauthorised ways
Vers.1.0 - March 2016

BATTERY REPLACEMENT

WASTE DISPOSAL

Eq ui p me n t (WEEE)"
.
-4-
( Fig.6)
M-SNOOP
Copyright 2016
Tabla de contenido
loading

Tabla de contenido