Measuring Object Temperature / Room Temperature - Beurer FT 90 Manual De Instrucciones

The memory can be called up as follows:
• With the thermometer switched on, press and hold the MODE/MEM button for 5 seconds.
The most recent measurement is displayed.
• With each subsequent pressing of the MODE/MEM button, first the storage space number
is displayed followed by the measurement upon release.
• In the upper line, the time and date are displayed alternately.

8. Measuring Object Temperature / Room Temperature

If you want to measure an object temperature with this thermometer, switch
to object temperature mode.
• With the thermometer switched on, briefly press the MODE/MEM button.
The device switches to the object temperature mode .
• Hold the thermometer 2 – 3 cm (0.78 – 1.18 in) from the measuring
point. Briefly press the Start-measurement button and read the
temperature in the display (Fig. 9).
Measurements taken in object temperature mode are not stored.
If you want to use the thermometer to measure the room temperature you
need to switch to room temperature mode.
• With the thermometer switched on, briefly press the MODE/MEM
button twice.
The device switches to the room temperature mode
• The room temperature is immediately displayed (Fig. 10).
Measurements taken in room temperature mode are not stored.
.
17
Fig. 9
Fig. 10