Declaration Of Conformity - Bosch PAS 11-21 Instrucciones De Servicio

1 609 929 H72.book Seite 4 Dienstag, 15. März 2005 8:40 08
WARNING! This appliance must be earthed.
Important instructions for connecting a new
3-pin plug.
The wires in the cable are coloured according to
the following code:
strain relief
live = brown
earth = green/yellow
neutral = blue
Do not connect the blue or brown wire to the
earth terminal of the plug.
Important: If for any reason the moulded plug is
removed from the cable of this machine, it must
be disposed of safely.
Malfunctions
If the machine vacuums poorly, check the follow-
ing:
– Is the vacuum hose system clogged?
– Are the extension wands connected firmly?
– Is the container full?
– Is the dust bag 13 full?
– Is the permanent filter 3 clogged?
Emptying at regular intervals ensures optimum
vacuuming performance.
Disposal
Power tools, accessories and packaging should
be sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into
household waste!
According to the European Direc-
tive 2002/96/EC on waste electrical
and electronic equipment and its in-
corporation into national law, power
tools that are no longer suitable for use must be
separately collected and sent for recovery in an
environmental-friendly manner.
13 • 1 609 929 H72 • TMS • 03.03.05
Service and Customer
Assistance
Exploded views and information on spare
parts can be found under:
www.bosch-pt.com
Great Britain
Robert Bosch Ltd. (B.S.C.)
To be fitted
P.O. Box 98
by a qualified
professional only
Broadwater Park
North Orbital Road
Denham-Uxbridge
Middlesex UB 9 5HJ
Service
Advice line
Fax
.............................................
Ireland
Beaver Distribution Ltd.
Greenhills Road
Tallaght-Dublin 24
Service
Fax
....................................................
Australia and New Zealand
Robert Bosch Australia Pty. Ltd.
RBAU/SPT
1555 Centre Road
P.O. Box 66
3168 Clayton/Victoria
.............................................
Fax
.............................................
www.bosch.com.au

Declaration of Conformity

We declare under our sole responsibility that this
product is in conformity with the following stand-
ards or standardization documents: EN 60 335
according to the provisions of the directives
73/23/EEC, 89/336/EEC.
05
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Geschäftsbereich Elektrowerkzeuge
Subject to change without notice
English - 4
+44 (0) 18 95 / 83 87 82
............................
+44 (0) 18 95 / 83 87 91
....................
+44 (0) 18 95 / 83 87 89
+353 (0)1 / 414 9400
...................................
+353 (0)1 / 459 8030
+61 (0)1 / 3 00 30 70 44
+61 (0)1 / 3 00 30 70 45
Dr. Eckerhard Strötgen
Head of Product
Certification