8 electrolux
SPIN REDUCTION DIAL
By turning the spin speed selector you can
change the spin speed of the selected pro-
gramme or to select «Rinse hold» or «No
spin»option.
PROGRAMME SELECTOR DIAL
It allows you to switch the appliance on/off
and/or to select a programme.
TABLE OF SYMBOLS
= Delay Start,
Quick,
= Super Rinse,
Pause
BEFORE FIRST USE
Warning!
Ensure that the electrical and water con-
nections comply with the installation in-
structions.
Important! Remove any material from the
drum.
Important! We recommend you to run a
wash programme without any load, to clear
DAILY USE
Load the laundry
Open the door by carefully pulling the door
handle outwards. Place the laundry in the
drum, one item at a time, shaking them out
as much as possible. Close the door.
Make sure that no laundry stays between
the seal and the door. There is a risk of wa-
ter leakage or damage to the laundry.
MEASURE OUT THE DETERGENT AND
THE FABRIC SOFTENER
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent re-
quired, pour it into the larger compartment
on the left
.
= Prewash,
=
= Start/
= Washing,
= Cycle End,
= Rinse Hold,
ton,
= Synthetic,
Handwash,
= Wool, 30 ° = Mini 30 ° ,
=Drain,
=Cold,
any residues which may have been left by
the manufacturing process. Pour approx.
100 ml of detergent straight into the drum
and run a cotton cycle at 60°C. When the
programme is finished the machine will be
ready to use.
If required, pour fabric softener into the
smaller compartment marked
amount used must not exceed the «MAX»
mark in the drawer). Close the drawer gen-
tly.
= Rinses,
= Spin,
= Door Locked
= No Spin,
= Cot-
= Delicate,
=
= ON/OFF
(the