Manual Override; Programming Functions; Programming Menu Items - Amana MC52200 Serie Manual Del Propietário

Manual Override

1. Open oven door and place food in oven. Display
shows "door". Oven fan and light operate.
2. Close oven door. Display shows active menu and
"ITEM".
3. Press TIME ENTRY pad. Display shows "0000".
4. Press numbers to enter desired cooking time.
Change power level by following procedure in steps
5-6 below. If 100 percent power is desired, proceed to
step 7.
5. Press POWER LEVEL pad. Display shows "COOK
LEVEL" and current power level.
6. Press numbers to enter desired power level.
For example, press 2 pad for 20 percent power.
7. Press START pad and oven operates. Display
shows "POWER" when microwave energy is
present. If power level was programmed, display shows "COOK LEVEL". Display counts down
cooking time.
8. Oven stops and signals when timing sequence is
finished. Display shows "EOC".
9. Open oven door and remove food.

Programming Functions

Programming Menu Items

1. Open oven door. Display shows "door". Oven exits
programming mode if door is closed or RESET is
pressed before finishing programming sequence.
2. Press and hold pad number 1 for five seconds.
After five seconds, signal sounds. "P" and active
menu display.
3. Press ADD to begin programming.
4. Press desired menu pad. "MENU" indicator
displays.
5 Press number pad to be programmed. "QTY"
(quantity) and "LIMIT" indicators and the current
quantity limit flash.
Note: To change quantity limit:
• Press hidden enable pad. Locate hidden
enable pad to the immediate left and slightly
down from the BREAKFAST-1 pad. Signal
sounds.
• Press number pad to enter quantity limit.
Maximum quantity limit for each menu item
is nine.
• Press START to save new quantity limit.
6. Press number pad to enter quantity. Quantity
selected, program time and power level for stage 1
display. "STG" (stage) indicator and stage numbers
with nonzero times also light up if multiple stages
exist.
Note: Signal sounds if quantity selected is not within
quantity limit. Repeat step 5.
7. Press numbers to enter desired cooking time.
Change power level by following procedures 7-8.
If 100 percent power is desired, proceed to step 9.
8. Press POWER LEVEL . "COOK LEVEL" indicator
and current power level display.
9. Press numbers to enter desired power level. New
power level displays. For example, press pad
number 2 for 20 percent power.
10. Press START pad to lock new heating time and
power level in oven memory. Display shows "P".
Repeat steps 4-9 for additional programming.
11. Press RESET pad or close oven door to exit
programming mode.
9