Care And Cleaning - Oster CKSTPCEC6801-013 Manual De Instrucciones

To Change the Temperature:
You can change the temperature on certain functions before cooking begins by pressing
the TEMP ADJUST button before pressing START/STOP.

CARE AND CLEANING

Cleaning should only be carried out when the the Oster Express Multi-Cooker is cool
®
and unplugged. Allow the Multi-Cooker to completely cool before cleaning. Do not use
the removable Cooking Pot on the stovetop, inside a microwave oven or inside an oven.
Use the pot only inside the Oster Express Multi-Cooker Heating Base. Wash the Sealing
®
Gasket and Lid by hand in warm, soapy water. Dry all parts thoroughly.
Cooking Pot:
When removing the Cooking Pot from the Heating Base, always use two hands and lift
directly upward. Failure to do so may result in scratching the outside of the Cooking Pot
(see figure 3).
If food sticks or burns to the surface of the Cooking Pot, then fill it with hot soapy water
and let it soak before cleaning. Use a rubber or nylon spatula to remove stubborn
residue. If scouring is necessary, use a non-abrasive cleaner and a nylon scouring pad or
brush.
Although the Cooking Pot is dishwasher safe, we recommend hand-washing to preserve
the non-stick coating.
If white spots form on surface of Cooking Pot, then soak it in a solution of vinegar or
lemon juice and warm water for 30 minutes. Rinse and dry.
Note: Never use metal utensils or cleaning devices on the Cooking Pot, as this may
result in scratching and damaging the non-stick coating.
Figure 3
Exterior
Wipe the exterior of the Heating Base with a damp cloth and polish dry. DO NOT use
harsh abrasives, scourers or chemicals, as these will damage the surfaces. To prevent
damage to the Multi-Cooker do not use alkaline cleaning agents when cleaning. Only use
a soft cloth and mild detergent. Never immerse the heating base, or power cord and plug
in water or any other liquid.
Condensation Collector
Empty any collected water from the Condensation Collector after each use. Wash in
warm, soapy water.
Lid and Sealing Gasket
Always examine the gasket before each use. The silicon Sealing Gasket on the inside of
your Multi-Cooker Lid may deteriorate over time. Remove Sealing Gasket for cleaning
as needed. Hand clean using warm, soapy water, dry thoroughly, and replace Sealing
Gasket in Lid before use. Leave the Lid upturned for storage, as this will also extend the
life of the gasket. Sealing Gasket may need to be replaced every 1 – 2 years depending
on regular use. Contact Oster customer service to order replacement parts.
®
E 13
CKSTPCEC6801_18SEM1.indd 13 5/14/18 10:18