Plunge Cutting - Carat Dustcatch Pro Manual De Instrucciones

FINALIZING
1. Screw the Handle to the angle grinder.
2. Insert [q] Swing Duct into the Duct.
3. Connect the Vacuum Hose with
[q] Swing Duct by [r] Vacuum Joint.
(Fig.16)
[CAUTION]
Use the Vacuum with Input Power
1,500W or more for enough
dust extraction performance.
CUTTING
1. Turn on the SW of Vacuum.
2. Securely hold the Handle.
3. Turn on the SW of angle grinder.
4. Place the Front Rollers on the
cutting material.
5. Slowly forward the angle grinder.
(Fig.17)
[CAUTION]
DO NOT pull the angle grinder
backward, or it leads to the scattering
of the Dust.
(Fig.18 and 19)

PLUNGE CUTTING

1. Turn on the SW of Vacuum.
2. Securely hold the Handle.
3. Turn on the SW of angle grinder.
4. Place the Front Rollers on the cutting material.
5. Pivotally lower the angle grinder slowly.
(Fig.20)
[CAUTION]
The Plunge Dust can't be well extracted with the cutting
depth over 40mm.
Carat Nederland B.V.
Nikkelstraat 18, 4823 AB Breda
Vacuum Hose
[r]
3
Handle
[q]
2
1
Front Roller
4
5
Fig.16
O K
Fig.18
1
2
4
25-5-2018
Kees van Beek
Managing Director
1
3
2
Front Roller
Fig.17
N G
Fig.19
3
5
Fig.20
-13-