Qualification And Training Of Personnel; Safety-Conscious Working; Safety Instructions For The Operator/User - Flotec EVO-MULTIMAX 340 LOGIC SAFE Manual De Instrucciones

ENGLISH
Translation of the original.
You have purchased a product with ex-
cellent quality and service. Secure this
service by carrying out the installation
works in accordance with the instruc-
tions, so that our product can perform its
task to your complete satisfaction. Please
remember that damage caused by incor-
rect installation or handling will adversely
affect the guarantee.
Therefore please adhere to the instruc-
tions in this manual!
SAFETY
INSTRUCTIONS
This instruction manual contains essential in-
formation that must be observed during instal-
lation, operation and servicing. It is therefore
important that the installer and the responsible
technician/operator read this instruction man-
ual before the equipment is installed and put
into operation. The manual must always be
available at the location where the pump or the
plant is installed.
Failure to observe the safety instructions can
lead to the loss of all warranty.
In this instruction manual, safety information is
distinctly labelled with particular symbols. Dis-
regarding this information can be dangerous.
General danger to people
Warning of electrical voltage
ATTENTION! Danger to equipment and oper-
ation
14 14
Qualification and training of
personnel
All personnel involved with the operation, ser-
vicing, inspection and installation of the equip-
ment must be suitably qualified for this work
and must have studied the instruction manual
in depth to ensure that they are sufficiently
conversant with its contents. The supervision,
competence and areas of responsibility of
the personnel must be precisely regulated by
the operator. If the personnel do not have the
necessary skills, they must be instructed and
trained accordingly.

Safety-conscious working

The safety instructions in this instruction man-
ual, the existing national regulations regarding
accident prevention, and any internal working,
operating and safety regulations must be ad-
hered to.
Safety instructions for the
operator/user
All legal regulations, local directives and safety
regulations must be adhered to.
The possibility of danger due to electrical ener-
gy must be prevented.
Legal regulations must be observed.
Safety instructions for instal-
lation, inspection and mainte-
nance works
As a basic principle, works may only be car-
ried out to the equipment when it is shut down.
Pumps or plant that convey harmful substances
must be decontaminated.
All safety and protection components must be
re-fitted and/or made operational immediately
after the works have been completed. Their ef-