Idiomas disponibles
Idiomas disponibles
Indicator
1-Low battery symbol
2-MAX or MIN Symbols
3-%RH symbol
4-Humidity value
5-°C/°F symbol
6-Auto power off symbol
7-Temperature symbol
Function
Power
Press the power button to turn power on or off.
Humidity and air Temperature Measurements
• Hold the probe in the area to be tested & allow adequate time for readings to
stabilize.
• Press °C/°F switch to enter selector °F or °C measurement.
• Read the Relative Humidity and Air Temperature.
NOTE: Do not immerse the probe in liquid, it is intended for use in air on.
Minimum (MIN) Maximum (MAX) Function
The MIN/MAX mode allows the user to view only the lowest (MIN) or highest (MAX)
readings.
• Press the MIN/MAX button once and "MAX" appears on the display. The LCD is
now displaying the maximum
• reading of the selected parameter in the display. The display will not change until a
higher reading is registered.
• Press the MIN/MAX button again and "MIN" appears on the display. The LCD is
now displaying the minimum
• reading of the selected parameter in the display. The display will not change until a
lower reading is registered.
• Press the MIN/MAX button for 3 seconds to exit the MIN/MAX mode, and the
"MAX" or "MIN" icon will disappear.
Note: While powering on the meter per time, it restarts recording Minimum and
Maximum and the recordings
don't stop until the meter is turned off.
www.grupotemper.com
Mini Temperature & Humidity Meter
Battery Replacement
If the sign "
" appears on the LCD display, it indicates that the battery should be
replaced. Open the battery
case and replace the exhausted battery with new battery. (1 x 9V battery NEDA 1604,
6F22 or equivalent)
KTD-01 MINI
2
