Starting The Program; Child Lock - Beko DU 9133 RA Manual Del Usuario

Operating the product
Canceling the end duration function
If you want to cancel the end duration set-
ting countdown and start the program right
away:
1. Cancel the program by pressing the On/
Off button. Turn on the drying machine
again by pressing the On/Off button.
When your drying machine turns on
for the first time, it turns on with the
declaration (cotton wardrobe dryness)
program.
2. Select the program you desire using the
Program Selection knob.
3. Start the program by pressing the Start /
Pause button.

5.11 Starting the program

Start the program by pressing the Start /
Pause button.
Start/Pause led and the Drying led light up,
indicating the program started. The ":" sign in
the middle of the remaining duration starts
to blink.

5.12 Child Lock

The machine features a child lock which pre-
vents the machine program flow from being
affected when buttons are pressed during
operation.
When the Child Lock is active, all buttons ex-
cept for the On/Off button are deactivated.
To activate the child lock, press the Sound
Notification button and End Duration button
simultaneously for 3 seconds.
Te child lock should be deactivated to be
able to start a new program after the current
program ends or to be able to interfere with
the current program. Keep the same buttons
pressed for 3 seconds again to deactivate the
child lock.
C
The lock led on the screen
lights up when the Child Lock is
activated.
C
Child Lock deactivates when the
machine is turned off and on
again using the On/Off button.
22 / EN
A warning sound is heard when any button
is pressed (except for On/Off button) or the
Program Selection knob is turned while the
child lock is active.
5.13 Changing the program
after it is started
After the machine starts running, you can
change the program you selected to dry your
laundry with a different program.
1. For example, to select Extra Dry program
instead of the Iron Dryness, stop the
program by pressing the Start / Pause
button.
2. Turn the Program Selection knob to
select the Extra Dry program.
3. Start the program by pressing the Start /
Pause button.
Adding and removing laundry in
stand-by mode
If you want to add or remove laundry after
the drying program starts:
1. Press the Start/Pause button to take
the machine into Stand-by mode. Drying
operation stops.
2. Open the loading door, add or remove
laundry and close the loading door.
3. Start the program by pressing the Start /
Pause button.
C
The laundry adding made after
the drying operation started may
cause the dried laundry inside
the machine to mix with the
wet laundry and the laundry to
remain damp after the operation
ends..
C
Laundry adding and removing
can be repeated as much as
desired during drying operation.
But this process would
continuously interrupt the
drying operation, and so would
cause the program duration
to lengthen and increase
energy consumption. Thus, it is
recommended to add laundry
before the program starts.
Dryer / User Manual