Blackmagic Design ATEM Mini Manual De Instalación Y Funcionamiento página 43

Cutting Out Boring Bits or Mistakes
Sometimes you might have parts of your show that are a bit slow, or you could have stopped
because of a mistake. You can cut out these sections by using the split tool. Below the media
pool there is a tool on the left side that looks like a pair of scissors. Click this tool and you will
split all the layers in your timeline. Now if you click the clips between the cuts, you can just
press delete to remove those clips and the gap in the timeline will close up automatically.
You can see how easy it is to do common fixes to your live event. Now select quick export on
the top right of the cut page window and you can get a new master file with all these
changes applied.
Editing in DaVinci Resolve
To understand how to use DaVinci Resolve, it's best to watch some tutorial videos online and
download the free version to use for training. DaVinci Resolve is very sophisticated and is used
by high end Hollywood studios on feature films, however the cut page is a lot simpler and is
easy to learn. Check online for more information.
Recording in Camera
Blackmagic Pocket Cinema Camera 4K and Blackmagic Pocket Cinema Camera 6K models can
be controlled by the ATEM Mini switchers via the HDMI cable that connects from the camera to
the ATEM Mini. It does this using some communication wires in the cable.
This means you can do color correction and adjust lens settings via the camera control panel in
the ATEM Software Control app. Please check the section in this manual that describes how
this works.
Another advantage of this control is you can select the record in camera setting in the record
stream palette so you can record in the cameras while recording to a USB disk.
The advantage of recording in camera is that the cameras will record in Blackmagic RAW, which
is a film gamma file that's perfect for applying advanced color correction. However even more
exciting is that the files in camera are 4K, so by using these files you can master your live
production in Ultra HD. Even though ATEM Mini Pro ISO is a HD switcher, you can still deliver
Ultra HD masters for upload or broadcast.
The connections to the camera will upload timecode as well as camera number and filename
information. This means the Blackmagic RAW files will be in sync with the switcher timecode.
This makes using them easy.
To use Blackmagic RAW files from the cameras, be sure to select the record in camera setting
in the record stream palette. Then once you have completed recording, be sure to copy the
camera files into the Video ISO files folder from the ATEM Mini Pro ISO. It's important you do
this as DaVinci Resolve needs to see these files when you first open the DaVinci Resolve
project file.
However one problem with using both ISO files from the switcher and the Blackmagic RAW files
from the camera is they will clash. Both files have the same timecode and the same camera
number. This is not an issue because DaVinci Resolve, by default will use the ISO files.
To change to use the higher resolution Blackmagic RAW files in your project, just select the
camera originals button on the top right of the cut page window. The icon that looks like a little
camera. Once you select this icon, you should see your timeline change as it's now selected
the Blackmagic RAW files, which are film gamma.
You might need to add color correction to these files to make your cut look good. Blackmagic
RAW files are clean without color correction, so you can use the powerful color correction tools
in DaVinci Resolve to create an amazingly graded master.
ATEM Software Control 43