Atem Software Control - Blackmagic Design ATEM Mini Manual De Instalación Y Funcionamiento

Audio Meters Each input and the program output has its own audio meter and you can
‚
monitor them all simultaneously. If the audio level rises above -10dB the meter will illuminate
red to warn you that it is close to the maximum strength of 0dB. Once the level reaches 0dB
the audio will clip. Clipping means the audio will distort and you will need to decrease the
level using ATEM Mini Pro's audio level buttons or the audio mixer in ATEM Software Control.
You can read more about ATEM Software Control in the next section of this manual.
The audio meter is an important tool to monitor your levels so you can make sure your audio
always sounds great!
Fairlight Icons These icons let you know if EQ and dynamics controls are enabled in
‚
ATEM Software Control's audio page.
If the Fairlight icons are colored and illuminated, the EQ or dynamics tool is
active and the input is on air.
If the icons are colored but dim, it means the tools are active, but the input
is not on air.
If the icons are dim and colorless, the tools are inactive or bypassed on the
audio page.
The multiview is an excellent tool that will let you spot every detail and put you in the moment.
For example, it can help you previsualize ideas in the preview window before switching them to
the program output. You can monitor each HDMI source and test switching between them, set
up a chroma key, or even preview a transition to see what it will look like before switching it to
the program output!

ATEM Software Control

ATEM Software Control is a powerful software control panel that gives you a lot more control
over your ATEM Mini. Once you start using ATEM Software Control you will quckly see just how
much your ATEM Mini can actually do.
For example, you can manually perform transitions using the fader bar, select internal sources
on the program and preview buttons, mix audio using a mixer with channel faders, set up
keyers, load graphics in the media pool and much, much more.
ATEM Software Control 26