Eurofred S/S Counters Serie Manual De Instrucciones página 6

Function
Temperature setting and control(DIXELL)
The front panel of the thermostat
1. Defrosting light
2. Compressor operation light
3. Digital thermostat
4. Programming key (Service agent only)
5. Temperature modification keys
6. Manual defrost
How to see the set point

Push and immediately release the SET key, the set point will be showed;

Push and immediately release the SET key again or wait about 15s to return to • normal
visualisation.
How to change the set point

Push the SET key for more than 2 seconds to change the set point value;

The value of the set point will be displayed and the " °C " starts blinking;

To change the set value push the „

To memorise the new set point value push the SET key again or wait 15s.
Automatic defrost
The appliance will automatically run defrost cycles.
Note: The cycle starts from the time the appliance is initially powered up.
To manually defrost the appliance:

Press and hold the DEFROST

The defrost cycle will start immediately and the Defrost LED illuminates.
Note: Starting a manual defrost also resets the automatic defrost timer. The next automatic defrost
will start according to the set parameter after the manual defrost has finish ed.
Temperature setting and control (EVCO)
The front panel of the thermostat
1. Compressor operation light
2. Defrosting light
3. Energy saving light
4. Stand-by light
5. Programming key (service agent only)
6. Machine On/Stand -by (keep pushed)
7. Manual defrost (keep pushed)
How to unlock the keyboard (»Loc» message)

Push any button for more than 2s, «UnL» message will appear and the keyboard will be
unlocked.
GB
" (up) or „ " (down) arrows within 15s.
button for 5 seconds
6 P2M026STD-Ver1.1