Bosch TG502 Instrucciones De Funcionamiento Y Seguridad página 9

INSTALLING TUCKPOINTING
GUARD
To attach guard (Fig. 4):
1. Unplug tool from power source.
2. Position guard on spindle neck so arrows on
guard and spindle neck align.
3. Slide guard on spindle neck, rotate guard
until stability bracket and hole for auxiliary
handle are aligned.
4. Screw in auxiliary handle to secure guard
on the tool.
5. Always position wheel guard between oper-
ator and work piece and direct sparks away
from operator (Fig. 5).
To remove wheel guard:
1. Unscrew auxiliary handle.
2. Rotate guard until arrows on guard and
spindle neck are aligned.
3. Remove guard from spindle neck.
1600A003P6 08-14.indd 9
Fig. 4
GUARD
ARROWS
Fig. 5
GRINDERS WITH SLIDE SWITCH
PADDLE
SWITCH
GRINDERS WITH PADDLE SWITCH
9
GRINDER
SLIDE
SWITCH
8/13/14 2:22 PM