Zanussi ZRB935NX2 Manual De Instrucciones página 7

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

In this condition the temperatures are automati-
cally set (+ 5°C and - 18°C), in the best condi-
tions for storing food.
Set a different temperature in one of the com-
partment to switch off the function.
FreeStore Function
Press the key (D) (several times if necessary)
until the corresponding icon appears
Press the key (E) to confirm the selection. You
will hear the buzzer and the icon remains ligh-
ted.
Important! If the function is activated
automatically the FreeStore icon is not shown
(refer to "Daily use").
The activation of the FreeStore function
increase the energy consumption.
Action Freeze Function
The freezer compartment is suitable for long
term storage of commercially frozen and deep-
frozen food, and for freezing fresh food.
The maximum quantity of foods to freeze in 24
hours is shown on the rating plate.
To freeze the amount of food indicated on the
rating plate, place the food directly in touch with
the cooling surface (remove the drawer or bas-
ket). In case the food is frozen inside the draw-
ers or baskets, the maximum quantity is slightly
reduced.
To freeze fresh foods, you will need to activate
the Action Freeze function. Press key (D) (sev-
eral times if necessary) until
pears.
You must confirm the choice by pressing key
(E) within few seconds. You will hear the buzzer
and on the display will appear some animation
with lines.
After a pre-cooling period of 24 hours, place
the foods in the freezer.
Place the food to be frozen in the
ment, as this is the coldest point.
The freezing process takes 24 hours. During
this period do not put other foods in the freezer.
This function stops automatically after 52 hours.
It is possible to deactivate the function at any
time by pressing key (D) until
flash and then press key (E).
www.zanussi.com
Drinks Chill Function
The Drinks Chill function is to be used as a
safety warning when placing bottles in the freez-
er compartment. It is activated by pressing key
(D) (several times if necessary) until the corre-
sponding icon appears
You must confirm the choice by pressing key
(E) within few seconds. You will hear the buzzer
and the icon remains lighted.
In this condition it operates a timer with a de-
fault value of 30 min. and it could change from 1
to 90 min., by pressing key (B) you select the
minutes needed.
At the end of the selected time there are the fol-
lowing indications:
• on the indicator
• the icon
• the icon
• sounding of an acoustic alarm until key (E) is
At this point bear in mind to remove the drinks
contained in the freezer compartment.
It is possible to deactivate the function at any
time by pressing key (D) until the corresponding
icon will flash and then key (E).
Excessive temperature alarm
An increase in the temperature in a compart-
ment (for example due to an power failure) is in-
dicated by:
• flashing temperature
indicator ap-
• freezer compartment
• flashing of the icon
• sounding of buzzer
When normal conditions are restored:
• the acoustic signal shuts off
• the temperature value continues to flash
When you press key (E) to de-activate the
compart-
alarm, the highest temperature reached in the
compartment appears on indicator
some seconds.
Then it returns on the normal operation showing
the temperature of the selected compartment.
During the alarm phase, the buzzer can be
indicator will
switched off by pressing key (E).
flashing
flashing
pressed
.
the symbol
flashing
flashing
for
7
Tabla de contenido

Solución de problemas

loading

Tabla de contenido