Before First Use; How To Use - HJM BV426 Instrucciones De Uso

Batidora Vaso BV426_Maquetación 1 14/07/16 13:41 Página 18
1. INNER COVER
2. LID
3. GLASS JUG
4. SEALAING RING

BEFORE FIRST USE

- All parts of the blender are to be thoroughly cleaned before being
used for the first time. (See section: Cleaning).
- Take out the required length of cable from the cable tidy on the base
of the blender and connect the device to the mains supply.
ASSEMBLY OF THE GLASS JUG
1. Put the rubber sealing ring (4) on the inner edge of the blade unit (5).
2. Put the blade unit with sealing ring and ring (1 0) into the cup base (6).
3. Mount the glass jug (3) onto the cup base unit and tune the cup
base unit in clockwise direction unit it is fixed.
4. Mount the jug with cup base onto the base unit.
5. After putting the ingredients in the jug, fix the lid (2) onto the jug by
pressing down.
6. Insert the inner cover (1) into the opening of the lid, and turn it in
the clockwise direction unit it is locked.
INSERTING THE GLASS JUG
1. Make sure that the blender is switched off (Switch in the"0" setting).
2. Place the jug assembly (9) on to the motor block (7) and press
down until securely engaged.

HOW TO USE

1. Place the foodstuff you wish to process into the glass jug.
2. Put the lid on the glass jug and close securely. Place the measu-
ring cap into the hole in the lid and turn clockwise to lock. Switch
on the motor block.
5. CUTTING BLADE
6. CUP BASE
7. MOTOR BLOCK
8. ROTARY SWITCH
- 18 -
E
N
G
L
I
S
H