Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Licuadora LC945_Maquetación 1 22/12/16 09:38 Página 18
HOW TO ASSEMBLE
- Before first use: unclamp the Lock Cover and carefully disassemble
and wash the plunger, Top Cover, Filtrate Toil (CAUTION: "teeth"
are sharp), Segregator, Pulp container and juice cup in soapy
water. Rinse and dry. Never immerse the motor Unit wipe it with a
damp sponge or cloth.
- Fit the filter assembly onto the motor unit.
- Put the filter into the hole of the filter assembly. When properly
"seated", it should spin easily.
- Put the top cover.
- Raise the lock cover and fit the tab of each latch into the groove on
each side of the top cover. Press the bottom of each latch to lock it
in place. The unit will not operate unless the safety locking latches
are securely clamped.
- Position the juice cup under the segregator spout so that the han-
dle faces out.
HOW TO USE
- Prepare the fruit or vegetables to be processed by washing, pee-
ling, pitting, and cutting them as needed to fit into the Chute.
- Plug the cord into a standard outlet.
- Be sure the Juice Cup is all the way under the Segregator spout so
that processed juice will flow from the spout into the Cup. The Lock
Cover must be clamped down or the Juice Extractor will not operate.
- Turn the speed control switch.
- Place food into the Feeder Tube and press down with the plunger.
Never use your fingers to push the food down. Food can be conti-
nuously fed into the Feeder Tube without turning off the unit.
- When you're finished juicing or the Segregator or Juice Cup are full,
turn the unit "off". Unplug the unit.
CARE AND CLEANING
NOTE: To prolong the life of the unit, always clean all washable parts
after every use.
- 18 -
E
N
G
L
I
S
H
Tabla de contenido
