Speed Settings; Useful Tips - HJM BV426 Instrucciones De Uso

Batidora Vaso BV426_Maquetación 1 14/07/16 13:41 Página 19

SPEED SETTINGS

"1-2" setting for light usage with liquids
"3-5" setting for more solid consistency for mixing liquids and solid
food
"P" setting for ice crushing & short, powerful impulse movements.
(Please don´t put more than four pieces of ice in the jar at one time.)
After using the blender, always move the switch into the "o" setting
and pull out the socket out from power supply
To remove the glass jug just lift it up.You do not have to rotate the
glass jug to remove it.
Do not keep the blender running for more than 3 minutes con-
secutively to prevent motor to get damaged.

USEFUL TIPS

- To achieve the best results when pureeing solid ingredients, place
small portions into the glass jug one by one instead of placing a
large quantity all at once.
- If you are processing solid ingredients, cut them into small pieces
(2-3cm) first.
- When mixing solid ingredients start off first with a small amount of
liquid. Gradually add more and more liquid through the opening in
the lid.
- Always place your hand on top of the blender when you are opera-
ting the device to keep it more stable.
- For safety issues, please don't put over 60 degree hot water into
the jar when working.
- For stirring solid or very thick liquid ingredients we recommend that
you use the blender in impulse mode.
Never immerse the motor block in water. Wipe it only with a moist
cloth, and then wipe it with dry cloth again.
Simple cleaning/rinsing out the assembled glass jug.
- 19 -
E
N
G
L
I
S
H