Description Of The Machine; Machine Parts And Labels; Optional Kits; Accessories - Nilfisk VHS120 Manual De Instrucciones

Description of the machine

Machine Parts and Labels

Figure 1
1.
Identification plate which includes:
Model Code, which includes Class (L - M - H), Technical
Data (see table on page 6), Serial N°., EC Mark, Year of
manufacture, Input voltage.
2. Dust container
Longopac bag for collecting vacuumed material (VHS120
®
M-H).
3. Dust container release lever (VHS120 L).
4. Inlet.
5.
Inlet plug (VHS120 M - H).
6. Air outlet.
7. Castor locking lever.
8. Handle.
9.
Closing band lever.
10. Safety bolt.
11. Mechanical stop for liquids (VHS120 L).
12. Container for liquids (VHS120 L).
13. Inlet of the container for liquids (VHS120 L).
14. Plug for closing the inlet when the liquid container is
installed (VHS120 L).
15. Filtration class label.
16. Warning plate.
Draws the operator's attention to the fact that the filter
must only be shaken when the vacuum cleaner is turned
OFF (see also par. "Primary filter shaker").
17. Plug for connecting the vacuum cleaner to an electrical
socket.
This machine creates a strong air flow which is drawn in through
the inlet and blows out through the outlet.
Before turning on the machine, fit the vacuum hose into the
inlet and then fit the required tool on to the end part (refer to the
manufacturer's accessory catalogue or Service Centre).
The diameters of the authorized hoses are indicated in the
Technical data table.
The machine is equipped with a primary filter which enables it
to be used for the majority of applications.
In addition to the primary filter that retains the most common
dust, a secondary filter (absolute filter) can be installed.
This machine is equipped with an internal baffle plate which
subjects the vacuumed substances to a circular centrifugal
movement that makes them drop into the container.
Figure 2
Vacuum cleaners for dust harmful to health are classified
according to different dust classification, in compliance with
standard EN 60335-2-69 – Annexe AA:
1. Class L label
2. Class M label
3. Class H label
The class H label reads the following.
(VHS120 L).
and service the machine, including removing the
means used to vacuum the dust. Do not use without
the complete filter system in place.

Optional kits

Various optional kits are available for converting the machine.
On request, the machine can be supplied with optional kits
already installed. However, they can also be installed at a later
date.
Please contact the sales network for further details.
Instructions describing how to fit the optional kits and the
relative operation and maintenance manuals are supplied
together with the optional kits.
Use only supplied and authorised genuine spare parts.

Accessories

Various accessories are available; refer to the manufacturer's
accessory catalogue.
Use only genuine accessories supplied and authorised
by the manufacturer.

Packing and unpacking

All the dispatched equipment has been thoroughly checked
before being delivered to the haulage contractor.
On arrival, check the machine to see that it has not been
damaged during transport. If this is the case, immediately
lodge a complaint with the haulage contractor.
Dispose of the packing materials in compliance with the laws
in force.
5
CAUTION!
This vacuum cleaner
hazardous for the health.
Only authorised personnel wearing suitable
personal protective equipment should empty
CAUTION!
CAUTION!
VHS120
contains dust
GB
C438