Checking The Tightness Of Filter Chamber; Cleaning And Replacing The Separator; Disposal Of The Machine; Wiring Diagrams - Nilfisk 3707 Manual De Instrucciones

3707 - 3907 - 3907 L, M, H - 3907/18 - 3907/18 L, M, H
3707/10 - 3707/10 L, M, H - 3907 W - 3907 W L, M, H

Checking the tightness of filter chamber

If seal (A) between the container and filter chamber (C) fails to
guarantee tightness:
- loosen the four screws (B) that lock filter chamber (C)
against vacuum structure.
Allow filter chamber (C) to lower down and relock screws
-
(B) once it has reached the retention position.
The seal must be replaced if it is torn, cut, etc.
Replace seal (A) if the degree of tightness is still not optimum.

Cleaning and replacing the separator

If there is only a dust deposit on separator (D), allow the
dust to drop through the central hole.
Separator (D) should first be disassembled in order to be
perfectly cleaned:
■ release latches (A) that fasten lid (B) and remove the lid.
■ Remove the filter.
■ Unscrew the two screws (C) and remove separator from
the container.
■ Replace the part if excessively worn.
■ Assemble separator (D).
■ Lock it in position by screwing the two screws (C). Refit
the filter and close cover (B), locking it in place with the
two fastening latches (A).

Disposal of the machine

Dispose of the machine in compliance with the current laws in
force.
GB
Correct Disposal of This Product (Waste Electrical &
Electronic Equipment) (Applicable in the European Union
and other European countries with separate collection
systems)
This marking shown on the product or its literature, indicates
that it should not be disposed with other household wastes
at the end of its working life. To prevent possible harm to
the environment or human health from uncontrolled waste
disposal, please separate this from other types of wastes and
recycle it responsibly to promote the sustainable reuse of
material resources.
Household users should contact either the retailer where
they purchased this product, or their local government office,
for details of where and how they can take this item for
environmentally safe recycling.
Business users should contact their supplier and check the
terms and conditions of the purchase contract. This product
should not be mixed with other commercial wastes for
disposal.
C65
Figura 16
Figure 17
[ NOTE ]

Wiring diagrams

Basic machine
Item Code
Z8 39111
H1 + Z8 39113
+ Z8 39114
Z8 39112
H2 + Z8 39113
+ Z8 39114
Z8 39281
KM1 Z8 391005
Z8 39102
+ Z8 39366
Z8 391006
KM2
Z8 391007
+ Z8 39367
4083901387
KM3 Z8 391008
Z8 39102
+ Z8 39367
KT1 Z8 39119
Z8 39109
PA
+ Z8 39110
Z8 39107
PM
+ Z8 39108
Q1 Z8 39556
Q2 Z8 39557
Z8 39014
+ Z8 39726
Z8 39535
Q3
+ Z8 39726
Z8 39675
+ Z8 39684
TR1 Z8 391051
Z8 39120
M1 Z8 39121
Z8 39244
14
Figure 18
Description
White indicator
Red indicator
Contactor kW 4
24VAC 1NO
Contactor kW 5,5
24 VAC 1NO
Contactor kW 11
24 VAC
Contactor kW 3
24 VAC 1NC
Contactor kW 7,5
24 VAC
Contactor kW 4
24 VAC 1NC
Contactor kW 5,5
24 VAC 1NC
Contactor kW 11
24 VAC
Timer S/T 0 - 60 SEC
Red button
Green button
32A Main switch
Full inverter 32 A
Circuit breaker
11 - 16 A
Circuit breaker
14 - 20 A
Circuit breaker
25 - 32 A
Transformer
63 VA 400-230/24V
Terminal line
6 mmq S
Ground terminal
6mmq S
Fuse box terminal
1.5mmq S
04/2017
Q.ty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
11
3
2