Idiomas disponibles
Idiomas disponibles
EN
IMPORTANT! KEEP FOR FUTURE REFERENCE
INSTRUCTIONS FOR ASSEMBLY AND USE
CONVERTIBLE SWING'N HIGHCHAIR
For the safety of your child please read these
instructions and keep for future reference.
1. THREE STYLE
Baby swing, highchair, booster 3 in 1
1a. baby swing
1b. highchair
1c. booster
2. STANDARD CONFIGURATION PARES
2a. Frame
2b. Seat
2c. Hanging tube(L+R)
2d. Footrest
2e. Front tray
2f. AC-DC Power adapter
2g. Belt(Booster use)
3. SELECTIVE PARTS
3a. Toy bar
3b. Remote control
4. ASSEMBLE BABY SWING
4a-4i Make sure the axle in this position or cannot fixed with the fixed with the hanging tube.
5. INSTALL TOY BAR IF SUPPLY
6A 6B. INSTALL BATTERIES OR CONNECT ADAPTOR
7. KEY FUNCTION
7.1. Speed button: 8 speeds, each speed has a speed light. Press the "+" button to start
from 1st speed, press again for 2nd speed, press "-" to lower down the speed.
7.2. Natural song button: 5 natural songs (press the button to start from first song, press
again to move to next one continue. press and hold for 2 seconds to turn o the
natural songs).
7.3. Speed light button.
7.4. Timer button: 3 timers, 15 mins, 30 mins, 60 mins. Reach timer, swing stops.
7.5. Motion button: After baby fall asleep. When this function is selected, motion detec-
tor starts swinging when the baby shakes from crying.
7.6. Motion control light.
7.7. Power button: press button, the swing connects with power, and power light turns light.
7.8. Power light.
7.9 Music, song button: 15 songs.
7.10. Volume button
7.11. Timer light.
8. REMOTE CONTROL FUNCTION SELECTIVE
8.1. BUTTON BATTERY CR2025 3V (including)
8.2. power
8.3. 8 speed
8.4. 3 timer
8.5. 15 lullabies
8.6. volumn -
8.7. automatic stop button
8.8. 5 natural songs
8.9. volumn +
9. USE AS SWING
9a. backrest two positions adjustment
9b. adjustable toy bar
9c. footrest three position adjustment
9d. press the button
9e. length of footrest two position adjustment
9h. stop swinging
9i. to fold swing
9j. folded
10
10 . SWING TRANSFER TO HIGH CHAIR
11. USE HIGH CHAIR
11a. height seven position adjustment
11b. backrest 5 position adjustment
11c. footrest three position adjustment
11d. length of footrest two position adjustment
11e. front tray two position adjustment
11f. fold highchair
11g. folded
12A 12C. SWING TRANSFER TO BOOSTER
13. SAFETY SYSTEM USING
14. SEAT PAD UNFOLD
WARNING
IMPORTANT:KEEP FOR FUTURE USE
READ THIS INSTRUCTION CAREFULLY BEFORE USING AND KEEP IT FOR FUTURE REFER-
ENCE. FAILURE TO FOLLW THESE WARNINGS AND THE ASSEMBLY INSTRUCTION COULD
RESULT IN SERIOUS INJURY OR DEATH.
PRODUCTS NEED TO BE INSTALLED BY ADULT AND USED UNDER ADULT'S SUPERVISION.
1. DO NOT USE THE PRODUCT IF ANY PARTS ARE BROKEN, TORN OR MISSING AND USE
ONLY SPARE PARTS APPROVED BY THE MANUFACTURER.
2. ALWAYS USE HARNESS. DO NOT MOVE OR LIFT THIS PRODUCT WITH THE BABY INSIDE IT.
3. NEVER LEAVE CHILD UNATTENDED. DO NOT LET CHILDREN PLAY WITH THIS PRODUCT.
4. IT IS DANGEROUS TO PLACE THIS PRODUCT ON AN ELEVATED SUREFACE. ALWAYS USE
ON A FLAT, LEVEL FLOOR.
5. TO AVOID INJURY ENSURE THAT CHILDREN ARE KEPT AWAY WHEN UNFOLDING AND
FOLDING THIS PRODUCT.
6. BE AWARE OF THE RISK OF OPEN FIRE AND OTHER SOURCES OF STRONG HEAT, SUCH AS
ELECTIC BAR FIRES, GAS FIRES, ETC. IN THE VICINITY OF THE PRODUCT.
7. THIS PRODUCT DOES NOT INTEND FOR PROLONGED PERIOD OF SLEEP. SHOULD YOUR
CHILD NEED TO SLEEP, THEN PLACE THE CHILD IN A SUITABLE COT OR BED.
8. DO NOT USE THE PRODUCT WITHOUT THE SEAT CUSHION.
9. DISCONTINUE USING YOUR PRODUCT SHOULD IT BECOME DAMAGED OR BROKEN
10.THE INFANT SWING SHALL ONLY BE USED WITH THE RECOMMENDED TRANSFORMER.
11. DO NOT PLACE YOUR FINGERS IN THE MECHANISMS AND MAKE SURE THE CHILD'S
LIMBS ARE SAFE FROM HARM WHEN ADJUSTING THE CHAIR.
12. DO NOT LEAVE THE HIGH CHAIR EXPOSED TO SUNLIGHT FOR LONG PERIODS OF TIME.
WAIT UNTIL IT HAS COOLED DOWN BEFORE SITTING THE CHILD IN THE CHAIR.
BABY SWING
- STOP USING PRODUCT WHEN CHILD ATTEMPTS TO CLIMB OUT OR REACHES 9KG.
- TRANSFORMERS USED WITH THE INFANT SWING ARE TO BE REGULARLY EXAMINED FOR
DAMAGE TO THE CORD, PLUG, ENCLOSURE AND OTHER PARTS, AND IN THE EVENT OF
SUCH DAMAGE THEY SHALL NOT BE USED.
- THE INFANT SWING SHALL ONLY BE USED WITH THE RECOMMENDED TRANSFORMER.
ENGLISH
EN
IMPORTANT! KEEP FOR FUTURE REFERENCE
HIGH CHAIR
- THE HIGH CHAIR IS DESIGNED FOR CHILDREN FROM 6 MONTHS OF AGE UP TO A WEIGHT
OF 15 KG.
- DO NOT USE THE PRODUCT AS A HIGH CHAIR UNTIL THE CHILD CAN SIT UP ALONE. THE
TRAY AND ITS ACCESSORIS ARE NOT DESIGNED TO SUPPORT THE CHILD'S WEIGHT. THE
TRAY IS NOT DESIGNED TO KEEP THE CHILD IN THE SEAT AND DOES NOT SUBSTITUBE
THE SAFETY HARNESS.
- MAKE SURE THE PRODUCT SO THAT THE CHILD IS FAR FROM DANGERS SUCH AS ELECTRI-
CAL WIRING, HEAT SOURCES OF HEAT OR FIRE, SUCH AS GAS HOBS, ELECTRIC HEATERS, ETC.
- THE HIGH CHAIR IS DESIGNED FOR USE AT TABLES WITHOUT THE TRAY. IT IS SUITABLE
FOR CHILDREN FROM 12 MONTHS OF AGE UP TO A WEIGHT OF 15 KG. A SINGLE PROD-
UCT WHICH FOLLOWS THE GROWTH OF YOUR CHILD.
- FROM 0 TO 6 MONTHS, A COMFORTABLE BOUNCER.
- FROM THE AGE OF 6 MONTHS, A HIGH CHAIR FOR EATING, PLAYING AND RELAXING.
- FROM THE AGE OF 12 MONTHS, A HIGH CHAIR WITHOUT A TRAY, FOR SITTING AT THE
TABLE WITH THE ADULTS.
BABY BOOSTER
- THE MINIMUM DIMENSIONS (WIDTH AND DEPTH) OF THE SEAT OF THE CHAIRS FOR WHICH
THE CHAIR MOUNTED SEAT IS INTENDED, SHALL BE AT LEAST 20 MM GREATER THAN THE
BASE DIMENSIONS (WIDTH AND DEPTH) OF THE CHAIR MOUNTED SEAT MEASURED.
- THE MINIMUM HEIGHT OF THE BACKREST OF THE CHAIRS FOR WHICH THE PRODUCT IS
INTENDED, SHALL BE AT LEAST 100 MM GREATER THAN THE HEIGHT OF ANCHORAGE
POINTS OF THE CHAIR ATTACHMENT SYSTEM MEASURED.
- ALWAYS USE THE RESTRAINT SYSTEM AND ENSURE IT IS CORRECTLY FITTED.
- ALWAYS USE THE CHAIR ATTACHMENT SYSTEM AND ENSURE IT IS CORRECTLY FITTED
BEFORE USE.
- ALWAYS CHECK THE SECURITY AND THE STABILITY OF THE CHAIR MOUNTED SEAT ON
THE ADULT CHAIR BEFORE USE.
- DO NOT USE THIS CHAIR MOUNTED SEAT ON STOOLS OR BENCHES.
- THIS PRODUCT IS INTENDED FOR CHILDREN ABLE TO SIT UNAIDED (MINIMUM 6
MONTHS) AND UP TO 36 MONTHS OR A MAXIMUM WEIGHT OF 15 KG;
- THE ADULT CHAIR WITH THE CHAIR MOUNTED SEAT IS PLACED IN A POSITION WHERE
THE CHILD IS NOT ABLE TO USE ITS FEET TO PUSH AGAINST THE TABLE OR ANY OTHER
STRUCTURE AS THIS CAN CAUSE THE TIP OVER OF THE ADULT CHAIR SUPPORTING THE
CHAIR MOUNTED SEAT.
- NOT TO USE THE CHAIR MOUNTED SEAT IF ANY PART IS BROKEN, TORN OR MISSING.
- NOT TO USE ACCESSORIES OR REPLACEMENT PARTS OTHER THAN THOSE APPROVED BY
THE MANUFACTURER
FOR SAFE BATTERY USE
1. KEEP THE BATTERIES OUT OF CHILDREN'S REACH.
2. ONLY THE RECOMMENDED BATTERIES OR EQUIVALENT ARE TO BE USED, VOLTS AND SIZE.
3. BATTERIES ARE INSERTED WITH THE CORRECT POLARITY.
4. REMOVE EXHAUSTED BATTERIES FROM THE PRODUCT.
5. DO NOT SHORT-CIRCUIT SUPPLY TERMINALS.
6. RECHARGEABLE BATTERIES ARE TO BE REMOVED BEFORE BEING CHARGED.
7. RECHARGEABLE BATTERIES ARE ONLY TO BE CHARGED UNDER ADULT SUPERVISION.
NON-RECHARGEABLE BATTERIES ARE NOT TO BE RECHARGED.
8. ANY BATTERY MAY LEAK BATTERY ACID IF MIXED WITH A DIFFERENT BATTERY TYPE,
IF INSERTED INCORRECTLY(PUT IN BACK-WARDS) OR IF ALL BATTERIES ARE NOT RE-
PLACED OR RECHARGED AT THE SAME TIME. DO NOT MIX OLD AND NEW BATTERIES.
DO NOT MIX ALKALINE, STANDARD(CARBON-ZINC) OR RECHARGEABLE(NICKEL-CAD-
MIUM) BATTERIES.
9. ANY BATTERY MAY LEAK BATTERY ACID OR EXPLODE IF DISPOSED OF IN FIRE OR AN
ATTEMPT IS MADE TO CHARGE A BATTERY NOT INTENDED TO BE RECHARGED.
10. NEVER RECHARGE A CELL OF ONE TYPE IN A RECHARGER MADE FOR A CELL OF AN-
OTHER TYPE.
11. DISCARD LEAKY BATTERIES IMMEDIATELY. LEAKY BATTERIES CAN CAUSE SKIN BURNS
OR OTHER PERSONAL INJURY. WHEN DISCARDING BATTERIES, BE SURE TO DISPORE OF
THEM IN THE PROPER MANNER, ACCORDING TO YOUR STATE AND LOCAL REGULATIONS.
12. ALWAYS REMOVE BATTERIES IF THE PRODUCT IS NOT GOING TO BE USED FOR A
MONTH OR MORE. BATTERIES LEFT IN THE UNIT MAY LEAK AND CAUSE DAMAGE.
13. RECOMMENDED TYPE BATTERIES-ALKALINE DISPOSABLES, SIZE C(LR14-1.5V). NEV-
ER MIX BATTERY TYPES. CHANGE BATTERIES WHEN PRODUCT CEASES TO OPERATE
SATISFACTORILY.
MAINTENANCE
THIS PRODUCT REQUIRES REGULAR MAINTENANCE TO KEEP IT IN GOOD WORKING OR-
DER. REGULARLY CHECK ALL PARTS OF THE PRODUCT TO ENSURE THAT THEY ARE OPER-
ATING CORRECTLY AND FOR SIGNS OF WEAR OR DAMAGE. ONLY REPLACEMENT PARTS
SUPPLIED OR RECOMMENDED BY THE MANUFACTURER SHOULD BE USED.
CLEANING
REFER TO CARE LABEL ON THE PRODUCT FOR CLEANING INSTRUCTIONS FOR FABRICS.
CLEAN METAL OR PLASTIC COMPONENTS WITH MILD DETERGENT AND WARM WATER.
NEVER USE ABRASIVE, AMMONIA BASED, BLEACH BASED OR SPIRIT TYPE CLEANERS.
ENSURE THE PRODUCT IS FULLY DRY BEFORE USE OR STORAGE.
ENGLISH
