Tabla de contenido
For United States:
Cautions to the use
The changes or modifications not expressly approved
by the party responsible for compliance could void the
user's authority to operate the equipment.
RF exposure statements
IMPORTANT NOTE: To comply with the FCC RF
exposure compliance requirements, the antenna(s)
used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction
with any other antenna or transmitter. No change to the
antenna or the device is permitted. Any change to the
antenna or the device could result in the device
exceeding the RF exposure requirements and void
user's authority to operate the device.
Note:This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment
and receiver.
•
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV
technician for help.
Explanation of general view (Fig.1)
1.
Battery compartment locker
2.
Mobile (Cell phone) placing panel
3.
Play/Pause button
4.
Next track button/Fast-forward button
5.
Volume up button
6.
Volume down button
7.
Aux in indicator
8.
Volume max. or min. indicator/ Low battery indicator
9.
Bluetooth indicator
10.
Bluetooth pairing button
11.
Power button
12.
Previous track button/ Rewind button
13.
Speaker
14.
Handle
15.
DC in socket
16.
Auxiliary input socket
17.
USB charging socket
18.
Cable hole
19.
Mobile (Cell phone) storage cabinet
20.
18V battery terminal
21.
10.8 V battery terminal
22.
Battery cover
23.
Battery cartridge
24.
Button
25.
Mobile storage cabinet cover
Power
The speaker can be powered by Makita battery packs or a
standard wall outlet.
4
Tabla de contenido
