Technical Characteristics - TRAPP BIO 300 s Manual De Instrucciones

The TRAPP shredders are designed to shred tree
pruning, plant remains, decorative plants, branches,
twigs, leaves, trees bark, vines, tubers leaves,
flowers, kitchen waste, etc.
Maximum crushing diameter of 8 cm on the side
hopper and 3 cm on the top hopper.
Do not use this shredder for purposes other than
those mentioned above. You can only use original
TRAPP spare parts.
Specifications
Cutting blade diameter (cm)
Cutting blade width (cm)
Cutting blade speed (rpm)
Amount of hammers
Motor power (cv)
Gasoline motor power (HP)
Length without the handle (m)
Width (m)
Height (m)
Weight (kg)
Production (m /h)
3
Note: 1) The machines are set by default missing the electrical connection for both the (on / off) switch and the electric
motor, being at the discretion of the customer to make the connection at the desired voltage, as available in that region.
The wiring diagram of the motor is available on the motor itself so that the customer can make the connection.
Note: TRAPP does not take responsibility or offers warranty coverage in the case the motor blows due to incorrect electric
connection, as described in the manual.
46
Uses and Applications

Technical Characteristics

BIO 300
10 to 13.5
10 to 13.5
Using the different forms of this shredder you can
achieve valuable compost.
Important:
The newly pruned material
should dry a bit before being crushed. This
process provides better performance of the
crusher, yielding a better composting.
BIO 300E
35 35
21 21
2600 2600
28 28
10
–
1.00 1.00
1.15 1.15
1.22 1.22
129 189
4 to 6 4 to 6
www.trapp.com.br
BIO 300G
1)
35
21
2600
28
–
13.5 HP (Briggs &
Stratton) or 15 HP
(TRAPP / Lifan)
1.00
1.15
1.22
162
4 to 6