FITFIU FITNESS GYM-300 Manual Usuario página 33

2. Attach Backrest Cushion (57) into
Upright Support Tube(2), tighten by X2
Hex Head Bolt (25) and X2 Flat Washer
(34) through the thread holes on the
Backrest Cushion (57).
3. Attach the seat (58) to Seat Support
Tube(6) tighten by X2 Hex Head Bolt
(21) and X2 Flat Washer(33) through
the thread holes on the back side of
Seat (58).
4. Screw-in the Small Rubber Stopper
(52) into the front side of Seat Support
Tube (6).
5. Attach the Leg Curve Tube (7) to the
front side of Seat Support Tube (6),
tighten by X1 Hex Head Bolt (29), X2
Flat Washer (35) and X1 Nylon Nut (39).
6. Attach the Foam Tube for Leg Curl
(15) into the holes on Leg Curl Tube
(7) and front/upper bracket of Seat
Support Tube (6).
7. Attach the Foam for Leg Curl Tube (54)
onto the 2 sides of each Foam Tube for
Leg Curl (15).
MULTY-STATION GYM GYM-300
STEP 3
1. Place the Guiding Tube (5) into the Bridge
Tube (8) and tighten by X2 Flat Washer (33)
and X2 Hex Head Bolt (22).
2. Attach the Bridge Tube (8) to the Upright
Support Tube (2) and tighten by X2 Hex Head
Bolt (30), X4 Flat Washer (34) and X2 Nylon
Nuts (38).
STEP 4
1. Attach the Seat Support Tube (6) to the Upright
Support Tube (2), tighten by X2 hex Head Bolt (30),
X4 Curve Washer (34) and X2 Nylon Nuts (38).
33